I am a new-be so here goes guys. I put a 2001 600cc motor in my 1993 FE 350 bike. the guy that sold me the motor put my 350 flywheel and ing on the 600 motor. My question is what is the proper timing spec for this combination. on the old 350 motor it say rotate the stater all the way to the left. Will this work. Thanks for your help.
Help Support Husaberg:
ned37
Moderator
- Joined
- Dec 13, 2004
- Messages
- 2,462
- Location
- back in cottonwood, az
the 600 motor was only mfd thru the 2000 model. in 99 models, the stator was moved from the engine to the cover. hopefully, the crank taper and keyway location on the 600 is the same as the 350. i take it the three mounting tabs are still on the engine cases. i would follow the 350 timing method and put a strobe on it after you get it running and readjust as necessary.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
