CHARGING SYSTEM FAILING

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 10, 2010
Messages
3
Hey everyone
I stumbled on this beauty of a site while trying to find some service info on my Berg. I have an 08 550fe that decided not to start the other day during a ride and i had to bump start it. I tested the battery while the bike was running and it produced 12.31 volts at idle and when revved up it dropped voltage. Weird. Does anyone have some insight on this? I dont have a service manual for the bike and dont want to miss any riding time. I put the wiring harness and switches on it that made it street legal here in Canada, but i dont think that makes a differenceAnyway, any help u guys can offer would be greatly appreciated!! Thanks
 
try charging the battery using a battery tender. check bat voltage first; charge; check voltage again; and then check voltage as you try to start it. if it does start, continue to measure voltage between idle and revs. should increase under revs.
i think your bat is shot.
service manual is downloadable at http://www.husaberg.com/Husaberg-Motorcycles.1.0.html
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top