Brand new and won't start

DBR · Jun 8, 2010

I finally stepped up and bought a brand new leftover 09 FE 570. It arrived in the crate a few days ago. I just got it assembled and attempted to start it. It cranks over but won't light off. The fuel pump cycles, I pulled the plug and it has spark. Is there something I'm missing? I sure would appreciate any help because taking it back to the dealer is not a option. Thanks in advance.

DBR · Jun 9, 2010

Seriously no suggestions ? 8O

mud400 · Jun 9, 2010

When you are cranking it over do no touch the throttle.....
Does it have the latest and greatest FI map?

berger · Jun 9, 2010

Assuming there is fuel in it. Is the fuel line seated correctly? Battery has a full charge?

Davo · Jun 9, 2010

Any flashing errors on the Fuel Injection light?

Davo · Jun 9, 2010

Check Fuse 1 is OK or swap it with Fuse 2 if you can hear the fuel pump spinning.
Fuse 1 is to the EFI computer
Fuse 2 is the Fuel pump

DBR · Jun 10, 2010

Thanks I'll do that.

mickj · Jun 13, 2010

Did the dealer pd the bike , isn't it supposed to be connected to the dealers laptop on initial startup

DBR · Jun 15, 2010

It turned out to be a pinched O ring in the fuel line that attaches to the throttle body. Once I replaced that it fired right up and runs perfectly.

:cheers:

Brand new and won't start

Help Support Husaberg:

DBR

DBR

mud400

berger

Moderator

Davo

Davo

DBR

mickj

DBR

Similar threads

Register CTA

Recent Discussions

Recent Discussions