brake rotor to match Beringer calliper

crispy duck · Aug 17, 2014

So I'm fitting 17s to the berg that came with a 320mm rotor.

I'm looking for a 310mm rotor to match the Beringer caliper that mounts direct to the forks.

The wheels are from a aprilla pegaso I think and I can't find a 310mm rotor that will match the wheels.

The measurements I need are

310mm od
64mm id
80mm pcd 6 bolt
10mm off set

Is there a data base with rotor measurements on so I can find one from a different bike to match?

Failing that I can either make a bracket to move the caliper or have a custom disc made up to suit.

The cheaper option is the bracket but not the best looking and maybe not the strongest.
Also I don't think there is a 310mm to 320mm relocation bracket on the market.

So what other options are there ?

Thanks in advance

crispy duck · Sep 1, 2014

If any one was interested I Never found or made a bracket so decided to have the disc skimmed down to 310mm.

The other option was a custom disc for £300. So I will make do with this method for now.

Sent from my HTC One using Tapatalk

Goose916 · Sep 1, 2014

Braking still makes a "reasonably" priced wave rotor for Ktm hubs in 310 mm

Of course, nothing more blingy than a Berringer disc but you almost have to be in the 1% to buy one. Look for a used one, but be careful.

crispy duck · Sep 1, 2014

its not a kTM wheel/hub so i couldn't find one to match with the hole spacing.

Ghost · Sep 1, 2014

Might not be the cheapest (not the most expensive either) solution, but you'll like the stopping power.
And yes he does one offs for a little extra if there isn't a stock one that fits.

ISR Brakes
http://www.isrbrakes.se/products/ISR_Price_List.pdf

regards

/Nick

crispy duck · Sep 1, 2014

Thanks Ghost.

I got Quote from this company in the UK Which i think is the same company

ISR Custom Motorcycle Brake DIscs | Special, one-off discs made to measure

I'm going to get the bike back on the road and see how it performs before i decide to throw more money at it.

Plus i still need a Beringer Bro12 master cyclinder so it might have to wait.

crispy duck · Sep 1, 2014

Also more bits are still needed but it's coming together.

brake rotor to match Beringer calliper

Help Support Husaberg:

crispy duck

crispy duck

Goose916

crispy duck

Ghost

crispy duck

crispy duck

Similar threads

Register CTA

Recent Discussions

Recent Discussions