Bought a husaberg fe 470 and the wiring loom is a mess !

kevinbakker97 · Feb 27, 2023

Hello husaberg fans !

I bought myself my very first husaberg 470
It needs to be fixed the wiring harness is a mess so i need to fix all of the wiring i dont have a ignition switch and a light switch so the remaining buttons are the high/low switch for the starter and a on/off switch.
I found some wiring diagrams but they arent simular to my wiring system
I need some help with another diagram

a big thanks for anyone who can help me

Greetz from the netherlands

husabutt · Feb 28, 2023

Wiring diagrams are usually found in the owners manual. Here is a copy for your bike.

kevinbakker97 · Feb 28, 2023

Thanks !
But the problem is i dont have a ignition switch and they dont have a diagram without a ignition switch

Taffy · Mar 1, 2023

Come on mate! these bikes don't need an ignition switch, this is the most basic rudamentary electrics you'll see. you flivk the ignition switch on and you then have a live feed to the starter button. you hit the button and electricity goes to the starter motor.

the one ,istake everyone makes is this.
two things happen at the solenoid. the action of hitting the starter button means current goes into the solenoid and throws over the switch inside, having done this, this low amp electricity must now earth out. typically, it is a red/black and blue/white 2-pin connector near the right hand side justt ahead of the rear shock.
this 'gate' now allows the HT electricity to flow from the battery into the starter motor.

they are separate.

Taffy

kevinbakker97 · Mar 1, 2023

Taffy thanks !
The starter works again and the mess of wires is al sorted up !

So now i can move on to make the bike run again!

Bought a husaberg fe 470 and the wiring loom is a mess !

Help Support Husaberg:

kevinbakker97

husabutt

Attachments

kevinbakker97

Taffy

kevinbakker97

Similar threads

Register CTA

Recent Discussions

Recent Discussions