Yesterday, I put led blinkers on my 2007 fe450. I bought the bike a few days ago, and this is my first offroad bike. The switch and wireing was there, and I think I put the right wires together. When I turn the switch, one blinker lights up now and then, especially if I wiggle the switch. The other blinker is dead. Where is the blinker relay located? Is an unstable switch a common problem?
I will probably figure it out eventually, but I´m hoping for good tips and advise.
The tail light is also hooked up to the brake light. When I have the lights on, both tail light and brake light are activated. When the lights are off, the brake light works as it should.
I also have to install an ignition switch on the bike, preferably one that controls both the start button and the kick start.
Any Husaberg owners from Bergen, Norway here?
I will probably figure it out eventually, but I´m hoping for good tips and advise.
The tail light is also hooked up to the brake light. When I have the lights on, both tail light and brake light are activated. When the lights are off, the brake light works as it should.
I also have to install an ignition switch on the bike, preferably one that controls both the start button and the kick start.
Any Husaberg owners from Bergen, Norway here?
