Bent frame, Need confirmation
- Thread starter fe390vt
- Start date
-
- Tags
- bent confirmation frame
Help Support Husaberg:
- Joined
- Nov 6, 2011
- Messages
- 1,091
- Location
- Nordic countries
Couldn't open the pdf.
Seems I couldn't dl the whole file due to bad internet.
Seems I couldn't dl the whole file due to bad internet.
Last edited:
- Joined
- Aug 8, 2009
- Messages
- 1,296
- Location
- Charters Towers, Australia
Ouch, what happened?
I'll try to check it tonight too, also I have a friend with a 570 that has his engine out of the frame. I think he could take some photos on Friday.
Although I'm 99.9% sure that the mounts should be straight and without stress and that you have an issue.
Regards
3nduro
Although I'm 99.9% sure that the mounts should be straight and without stress and that you have an issue.
Regards
3nduro
Howdy
Note that this is a 2012.
Straight frame for reference.
Left side.
The engine mount sticks straight up vertically.
The engine mount has a "soft" bend horizontally as is clearly visible in the pic.
Right side
The engine mount sticks straight up vertically.
The engine mount has a "sharp" bend horizontally as indicated by the red line. There is no "bulge" what so ever by the nut.
Hope this helps
/3nduro
Note that this is a 2012.
Straight frame for reference.
Left side.
The engine mount sticks straight up vertically.
The engine mount has a "soft" bend horizontally as is clearly visible in the pic.
Right side
The engine mount sticks straight up vertically.
The engine mount has a "sharp" bend horizontally as indicated by the red line. There is no "bulge" what so ever by the nut.
Hope this helps
/3nduro
Last edited:
bent
thanks for the replies. Looks like i bent the mount tabs. One downfall of having a lowered ride I guess. Actually had a p3 guard on and the smash blew a hole right through it. Switching to an aluminum guard for the next bike/frame. Anyone have a frame for sale?
thanks for the replies. Looks like i bent the mount tabs. One downfall of having a lowered ride I guess. Actually had a p3 guard on and the smash blew a hole right through it. Switching to an aluminum guard for the next bike/frame. Anyone have a frame for sale?
hey rainy, High speed launch over waterbar to landing square on a rock on the right side of the frame when bottoming. Jolted the whole bike pretty good. Believe I cringed when it happened. No crash, kept riding.The bike has taken some pretty good hits since new. 370+ hrs...
Howdy Rainerio
My frames are not bent. I'm just posting reference pictures per fe390vt request so that he has something to compere with. I've changed my earlier posts to include that fact.
fe390vt frame seems bent and he writes something about hitting a rock with "only" a carbon fiber frame protector (skidplate) installed.
Regards
/3nduro
Last edited:
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
