- Joined
- Jun 6, 2008
- Messages
- 1,092
- Location
- Simi Valley Ca.
Well I just put in the order for an almost new 3.5x17 Behr wheel.
It cost me about $370 which doesn't seem to bad considering the circumstances.
The options were either to buy used ??
Buy new for about $660
Piece together parts from an 05 625 SMC for around $520
Or what I did. The Hubs are the same part numbers so I bought a
2006 Husaberg front wheel that was dented for $110.
I will use the Hub and Nipples with new Spokes and the new Black Rim
which I will strip and polish as I did before. $260 for the Rim and Spokes.
Where there's a will there's a way...
Just giving ideas for those of you wanting to do the same
pollo
It cost me about $370 which doesn't seem to bad considering the circumstances.
The options were either to buy used ??
Buy new for about $660
Piece together parts from an 05 625 SMC for around $520
Or what I did. The Hubs are the same part numbers so I bought a
2006 Husaberg front wheel that was dented for $110.
I will use the Hub and Nipples with new Spokes and the new Black Rim
which I will strip and polish as I did before. $260 for the Rim and Spokes.
Where there's a will there's a way...
Just giving ideas for those of you wanting to do the same
pollo
