hi all, i have a 99 fc400, 2500klms, i live in australia about 100mt elevation. I purchased bike 2nd hand about 5 years ago, it has always been hard to start, i have played with the carby, i can either get it to start easy when cold but it has a flat spot or hard to start cold and smooth through the rev range, i checked valve clearances, any assistance with recommendation's on jet sizes, clip position etc, any help appreciated.
Help Support Husaberg:
- Joined
- Feb 19, 2003
- Messages
- 3,227
- Location
- Escondido, Ca. USA
- Joined
- Feb 19, 2003
- Messages
- 3,227
- Location
- Escondido, Ca. USA
Additionally down load and read the "Hard Start Guide"
http://www.husaberg.org/index.php?module=Downloads&func=view&cid=1&start=0
http://www.husaberg.org/index.php?module=Downloads&func=view&cid=1&start=0
I had similar issues with my '03 400. I recommend the cdi jet / emusion tube, it worked well for me. My current settings from around 100 - 500 metres on vancover island. Not perfect but not bad either.
Main jet - 185
Needle jet - 270DR
Needle - K51
Needle clip - 2
Pilot jet - 40
Throttle slide - 4mm
Choke jet - 45
mixture screw - 1 turn out
Emulsion tube fitted
Main jet - 185
Needle jet - 270DR
Needle - K51
Needle clip - 2
Pilot jet - 40
Throttle slide - 4mm
Choke jet - 45
mixture screw - 1 turn out
Emulsion tube fitted
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
