550 04 still won't start

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Arc

Joined
May 6, 2014
Messages
4
Location
Essex
Hi,
Thanks for reply Taffy, I have checked out both carb and the valves look to be seated ok,put in fresh fuel and left off the exhaust headers, go for start up and popping out of ports and a lot of excess fuel blowing out as well.Could the problem be valve timing out?
Any thoughts.
 
Hi,
Thanks for reply Taffy, I have checked out both carb and the valves look to be seated ok,put in fresh fuel and left off the exhaust headers, go for start up and popping out of ports and a lot of excess fuel blowing out as well.Could the problem be valve timing out?
Any thoughts.

could be I suppose! get the ignition timing mark on the right to TDC and then look at the cam lobes.

regards

Taffy
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top