1998 Stock Fork Information ?

ToddWW44 · Jul 4, 2004

I need to know what the stock WP forks are on my 1998 FX600.

Fork Size: 48mm ?? 49mm ??
Spring Rate: 4.2 ??

I'm really not sure and I need to know in order to investigate purchasing some parts such as seals, boots, springs, etc.. Also, I am looking at purchasing an additional Berg that has 4.4 springs in the forks. Are these stock ? Stronger than stock ?

Thank You.

Todd

FC501EAST · Jul 4, 2004

fx600 fork info

Hi, toddWW44.....
I have a '98 fc501. My owners manual shows fe/fe-e models with 50mm, WP5060 Husaberg-E/280 mm, and fx/fc with 50mm, WP5060 Husaberg-MX/280mm Extreme.
I got the bike from my son-in-law, still set up for motocross. Spring rates way too stiff for me ( I'm a lightweight, 150-160 lbs.). I had both front and rear o/hauled and recalibrated for my weight with an emphasis on woods-type riding. Work was done by Factory Connection over in Rochester, N.H., only an hour away. The forks are set up as follows : spring rate 42kg, standard preload, oil level @160mm. Both compression and rebound set at 15 clicks out from full hard. I think the OEM spring rate was 45kg..
Check the downloads section. There are a couple of manuals there for the Husaberg suspensions.
Gary, in Maine

1998 Stock Fork Information ?

Help Support Husaberg:

ToddWW44

FC501EAST

Similar threads

Register CTA

Recent Discussions

Recent Discussions