Help Support Husaberg:
a. How do I remove the old bearing? Cannot figure it out. Should I hit the pin sideways?
b. Please look at the attachment and tell me which number worries you.
Oh, and I have a great problem to unscrew the middle bolt. I cannot remove the selector plates. The bolt is way too tight. Any tricks?
P.S. How can I put a pic in the post?
b. Please look at the attachment and tell me which number worries you.
Oh, and I have a great problem to unscrew the middle bolt. I cannot remove the selector plates. The bolt is way too tight. Any tricks?
P.S. How can I put a pic in the post?
Attachments
- Joined
- Nov 20, 2001
- Messages
- 17,028
- Location
- Ely, England
when do i get paid!
the mark you made is spot-on!!!!!!!!!!!!!! that is where they wear.
to undo the screw in the middle - i have only ever had one trick and that is to use a pair of mole grips AND a philips screw3driver.
regards
Taffy
the mark you made is spot-on!!!!!!!!!!!!!! that is where they wear.
to undo the screw in the middle - i have only ever had one trick and that is to use a pair of mole grips AND a philips screw3driver.
regards
Taffy
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
