Order of assembly...

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
B

boheme

Joined
May 2, 2005
Messages
137
Location
North of Stockholm, Sweden
Ok, I greased up my steeringbearings... and when I should put things together again I couldn´t rember in what order....

This is how I mounted it...from bearing and up...

first the adjustmentscrew... straight against the bearing...
then the dustprotector...
then the upper tripleclamp
then the locknut
then the bars...

what I´m confused about is... wether the adjustment screw should be over or under the dustprotector...

Another silly question... hope anyone remembers...

/Rikard
 
Follow the details on the attached 2 pages from the 2001 parts manual.

Joe
 

Attachments

  • Page 8 from parts.pdf
    88.3 KB
  • Page 6 from parts-2.pdf
    101.8 KB
yes, thanks Joe!

But it´s still confusing, ´cause in the manual it says that I should remove the dust protection and then turn the adjustment nut underneath... but in the partsguide it seems like the dust protection should be unerneath the adjustment nut...

Anyone that has recently been there or are about to fiddle with this... who can tell me...?

/Rikard
 
Ok.. I think I solved it...but according to the partsguide I miss a spacer...hmmm...

/Rikard
 

Attachments

  • bergsprague (3).JPG
    bergsprague (3).JPG
    64.7 KB

Similar threads

K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
canaberg
2004 FE650 With Bent Engine
Replies
7
Views
1K
fe600racer
fe600racer
Taffy
New - improved carb needle 2004-2008
Replies
3
Views
2K
FlyingZebra
FlyingZebra
L
Steering Head Bearing replacement with Scotts
Replies
4
Views
2K
LadyBerg
L
Taffy
Blatt's bike - good info
Replies
2
Views
2K
Grok
G

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top