Restoration Husaberg 501 / 1991

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
T

Tobias427

Joined
Nov 12, 2024
Messages
8
Location
qM_JjsnpZzxwW86Hs2ar
Hello everyone

I have just started to restore an old Husaberg 501 from 1991.

As I have never worked on a Husaberg before, I am missing some important information.
I would just like to get some basic information about the model and get some helpful tips.
What I have already noticed is that various parts are quite difficult to obtain, especially if you don't know exactly which year you can use everything for.

Does anyone have any tips on where I can get parts for my old bike, and which model years are identical?

I am also missing a wiring diagram and a workshop manual. As I have to redo the complete wiring harness, this would be very helpful.

1000049675.jpg
1000049673.jpg


Thanks a lot in advance.

Best regards
Tobias
 
Hello :)

Thank you very much, it has helped me a lot.
I have already painted the frame. Now I can get started.

1000049701.jpg
 
Looks like a good color match. Perhaps you could document your progress here. Not many 1991 frame up restos threads to be found. Should be fun.
 
Sure, I'll be happy to do that.
I've already done the steering head bearing today and cleaned them all properly. The steering head bearing will go into the ultrasonic bath tomorrow and will then be re-greased before the steering head is reassembled.


1000049807.jpg
1000049808.jpg
1000049809.jpg
 

Attachments

  • 1000049808.jpg
    1000049808.jpg
    2 MB
The suspension fork is already fitted. Slowly you can see what it is going to be. 😁

1000049850.jpg
 
hey Tobias, you're doing a great yob!! about parts for the early 'Berg's it's a bit of a challenge!!

check out the pre 2000 topic
 

Attachments

  • IMG-20170311-WA0023.jpg
    IMG-20170311-WA0023.jpg
    279.5 KB
  • IMG-20170311-WA0021.jpg
    IMG-20170311-WA0021.jpg
    167.3 KB
Hello
Thanks for the tip.
Yes, I have already noticed that with the parts :)

Unfortunately, both bearing sleeves and the swingarm axle were broken on the swingarm. Of course I couldn't find them anywhere. I have now bought hardened precision steel and am having the sleeves and axle re-milled by a colleague.

I have already re-stuffed the exhaust and powder-coated various small parts.
I'm really looking forward to seeing how the bike rides. :-D

By the way, do you know what they're actually worth? I can't find any FE 501s from 1991 for sale on the internet.

Cheers
Tobias
 

Attachments

  • 20241120_001901.jpg
    20241120_001901.jpg
    4.6 MB
  • 20241116_192119.jpg
    20241116_192119.jpg
    1.3 MB
  • 20241116_192006.jpg
    20241116_192006.jpg
    1.6 MB
  • 20241116_175912.jpg
    20241116_175912.jpg
    3.5 MB
  • 20241116_174447.jpg
    20241116_174447.jpg
    4.2 MB
Hi Tobias,
Good job, I believe I have seen the swingarm pins and bearing for sale on taffmeisters website. Solda moto in italy and Dave Clarke racing in the UK could be worth a try too. Early parts are scarce for sure but they're around in Europe. Try and find anything in Australia! I have posted on some of the facebook sites dedicated to husabergs and had responses.

I am working on a few, including a 1990 FC499 which came totally unassembled. I have rebuilt the motor so far, looking at doing the forks next with a revalve, otherwise you are way ahead! Keep up the updates.:)

1732313169896.png
 
Progress is being made. The swing arm has now been re-welded. This weekend I can mill the bearing seats and install the swingarm. If I get all the parts, the bike could be running by Christmas.

I'm still a bit worried about the wiring harness. There has been a lot of tinkering here... Does anyone have a wiring diagram of the 1991? Unfortunately I can't find it anywhere.
 

Attachments

  • 20241127_211202.jpg
    20241127_211202.jpg
    4.6 MB
  • 20241127_211153.jpg
    20241127_211153.jpg
    4.8 MB
The earliest I've seen is 1998. Have a look for that? Maybe Eric knows differently? Anyway, look up 1998 Owners manual or maybe it is in the parts book?

It's very basic, a live into a regulator will do. that will get rid of too many amps and turn to DC. Run the red into more reds, feed it everywhere and the switches can come before or after the bulbs and next is earth. Your positive (red) just runs up to the front and back of the bike and everything grabs off it.

Taffy
 

Similar threads

R
450/550/650 issues
Replies
0
Views
83
Richo360
R
S
Steve's 1998 FE501 Husaberg
Replies
1
Views
136
maxxx56
maxxx56
E
Hello from España! new owner of a Husaberg FE 501 1996 project bike.
Replies
2
Views
583
Sa63
S
G
2001 Fe501 - No Spark
Replies
3
Views
554
Taffy
Taffy
thorgan
2001 FE501
Replies
0
Views
43
thorgan
thorgan

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top