2010 FE450, won't start, help please

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
And if I put a wire to make bridge at 5&6 pin, can a let it there and run bike like that? Can it happens something wrong to the bike electrical system?
 
And also between pin 4 black and white from the rectifier and pin 5 black and white from the tester edge is no continuity. Can be damaged the wire or that’s what it should?
 
Leu002 said:
And also between pin 4 black and white from the rectifier and pin 5 black and white from the tester edge is no continuity. Can be damaged the wire or that’s what it should?
Click to expand...
Inside the wiring harness there is joint four whiteblack wires, you have to remove isolation tape and find problem.
 

Attachments

  • Screenshot_20240302_170027_Acrobat for Samsung.jpg
    Screenshot_20240302_170027_Acrobat for Samsung.jpg
    35.7 KB
I’m very disappointed because I don’t finde the problem….thanks for all the help!
 

Similar threads

W
2010 Fx450 crank no start after engine work
Replies
3
Views
482
waylon
W
T
no power to the fuel pump and lights on start FE450 2009
Replies
1
Views
504
tpayne
T
F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
1
Views
420
rikschipp
R
B
Spark for 2-3 seconds then nothing.
Replies
10
Views
581
mosierz48
M
S
2009 FE450 starting problem
Replies
6
Views
822
Waw
W

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top