What model is my Berg

TightCannon · Aug 21, 2005

HI guys have a FE501E
It has a digital dash and a yellow seat.
The Eng no is 5012642
The aussie plate says it was made in 08/02
the berg plate has
e5*92/61*0001*03
Vin = YU7fe5e8x30000023
so what have i got as far as the parts book goes. Ithink its a 2003 but not sure. Basically I need a sump plug and they show different no's in the 2002 and 2003 book
Ta

Parsko · Aug 21, 2005

That's an 03. They didn't start with the digital dash until 03. Plus, the seats are yellow then too. I have a post you can search for regarding making the digital dash more useful, if you are interested.

-Parsko

t-jet-tim · Aug 21, 2005

I think the 03 has two plugs and the 02
only has one.

TightCannon · Aug 21, 2005

NOW confused

Ok I have a digital dash but only one plug, I dont have the magnetic plug, could I have a mid model bike ie if it was made in 8/2002 do I have a good motor or not????

berger · Aug 21, 2005

It sounds like an 03 to me. As far as the motor, I would say it probably has the updates. The best way to tellwould be to pull the rocker cover and see if it has the updated rockers. I have pictures of the updated rockers in my gallery.

hribman · Aug 22, 2005

What diameter has your front wheel axle?
If itÃ‚Â´s 20mm it is a Ã‚Â´02, if itÃ‚Â´s 26mm itÃ‚Â´s a Ã‚Â´03.
The 2003 model has for example the voltage regulator underneath the seat, mounted to the splash shield.

I also only know one difference between Ã‚Â´02 and Ã‚Â´03 you can see without disassembling the engine - and thatÃ‚Â´s the magnetic oil plug.
But maybe you have an early Ã‚Â´03 model which has got double bearing counter balancer and roller bearings for the crankshaft.
But in my opinion both Ã‚Â´02 and Ã‚Â´03 engines are good.

You said you need a sump plug. What do you mean with that? The oil drain plug? I think the threads are of the same dimenions.

greetings

hribman

TightCannon · Aug 22, 2005

i need a sump plug as the last owner has rounded it to buggery. At the moment I have lock wired it and am only just nipping it up however the parts numbers are different from 03 on. I have contacted the local berg dealer but have not heard anything.

AS to the axle which diameter are you asking about, i have just pulled it out and its 20mm.
so some how i have a 02 model with digital speedo. will have to wait to pull the head over off to check rockers

What model is my Berg

Help Support Husaberg:

TightCannon

Parsko

t-jet-tim

TightCannon

berger

Moderator

hribman

Attachments

TightCannon

Similar threads

Register CTA

Recent Discussions

Recent Discussions