Help Support Husaberg:
- Joined
- Jan 1, 2019
- Messages
- 64
- Location
- Sweden
Not sure where but 21 you can build yourself, 15 is just a normal bearing puller that you can buy at most hardware and tool suppliers and in most cases actually works pretty okay to remove the flywheel with if nr 13 is miising in the garage. But i Believe if you are handy enough you can probably make that one as well with the right set of tools if it's the only thing that can pull the flywheel.
I actually just punched out the waterpump bearing with a hammer and flathead screwdriver with some heating as well since I didn't find a inner bearing puller anywhere (#18)
Skickat från min SM-G950F via Tapatalk
I actually just punched out the waterpump bearing with a hammer and flathead screwdriver with some heating as well since I didn't find a inner bearing puller anywhere (#18)
Skickat från min SM-G950F via Tapatalk
- Joined
- Nov 20, 2001
- Messages
- 17,028
- Location
- Ely, England
well the 2005 doesn't need the plate. the flywheel pullers are available and the two legged puller is a waste of time as there's virtually nothing for it to do. I have the FWP and so will every KTM dealer.
the only tool there I wish I had other than the small flywheel puller is the one that looks like an enormous 'Y'. the inner race must be removed and that is an excellent tool for this.
the car world uses a similar tool for half-shafts.
cheers
Taffy
the only tool there I wish I had other than the small flywheel puller is the one that looks like an enormous 'Y'. the inner race must be removed and that is an excellent tool for this.
the car world uses a similar tool for half-shafts.
cheers
Taffy
Do you know the dimensions of the flywheel puller? I'm thinking about 3d printing it or if that doesn't work just order it online but i can't find the dimensions.
Thanks for the input!
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
