The technical adventures of Dr_C

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Had a problem with gofundme donation. Turned out to be my Credit Card Company was stopping it. Call them all fix now. Keep it up Dr.C
 
Rainerio said:
Had a problem with gofundme donation. Turned out to be my Credit Card Company was stopping it. Call them all fix now. Keep it up Dr.C
Click to expand...
Thank you for the substantial support, Rainerio!
Nice to see that all those hours in the workshop and editing videos have had some value to you, viewers! Also warms my heart when somebody even is willing to contribute with their hard earned cash! Thank you! No way I can quit now! :)

Skickat från min SM-A310F via Tapatalk
 
You persistence reminds me of Burt Munro's cabinet, on display at the E Hayes Hardware Store in Invercargill.

offerings%2Bto%2Bthe%2Bgods%2Bof%2BSpeed.jpg


Great stuff Doc C!
 
Thanks, Steve!
I'm afraid my shelf of offerings would have taken over the workshop, so I have let it go to the bin. [emoji4]
steve said:
You persistence reminds me of Burt Munro's cabinet, on display at the E Hayes Hardware Store in Invercargill.

offerings%2Bto%2Bthe%2Bgods%2Bof%2BSpeed.jpg


Great stuff Doc C!
Click to expand...

Skickat från min SM-A310F via Tapatalk
 
Untitled.jpg

that was done in Italy aegis ago...worth a close look, teeth are offset so there is always something to grip on rather then a single line. all the best and hope to see you riding soon
 
Last edited:
Dr_C said:
You can send a bottle of Slivovitz to:
Mats Clementz
Ärenprisvägen 6
241 64 Harlösa
Sweden

It may not promote the project, but ease the depression when it goes south!

Yes. I'm kidding!

Skickat från min SM-A310F via Tapatalk
Click to expand...

A small donation made.

If you check with your customs if a plastic bottle with 0.5L of Šljivovica will pass controls I'd be more than glad to send you some...

Over here we say that Šljivovica gives you four wheel drive...in case of your bike It may not give it four wheel drive but if you have 2,5 dcl cca 15 mins before the race I guarantee you, you will not notice if something breaks in the engine and you will not notice if you crash... :D
 
makazica said:
A small donation made.

If you check with your customs if a plastic bottle with 0.5L of Šljivovica will pass controls I'd be more than glad to send you some...

Over here we say that Šljivovica gives you four wheel drive...in case of your bike It may not give it four wheel drive but if you have 2,5 dcl cca 15 mins before the race I guarantee you, you will not notice if something breaks in the engine and you will not notice if you crash... :D
Click to expand...
Thank you, so much, Makazica! Just to make sure your contribution has landed well: Did you use PayPal, GoFundMe or bank account?

I'm quite positive Slivovice will grow hair on your chest (too!) distort your vision and act as a perfect detergent for motor parts. A distant relation there to grappa. :cool:

I visited my current supplier in CZ earlier this week, but he was also out of stock...
 

Attachments

  • 20180810_164705.jpg
    20180810_164705.jpg
    83.7 KB
Last edited:
The drawings of the steel parts (counter balancer shaft, primary/secondary spur gears) are sent to the machinist and soon enough also the alu parts.
 

Attachments

  • Complete engine assembly 2.jpg
    Complete engine assembly 2.jpg
    74.5 KB
Now all 3D models are sent for manufacturing. So now I have been stripping the crank cases for all special parts that will be moved over to the "new" set of cases.

The needles in the big end bearing put dents in the crank pin! Ouch!
601ed0446e6e371c23f365b0fc8461c2.jpg


Skickat från min SM-A310F via Tapatalk
 
A small part

I want to see this succeed. I chip in too. Keep it on track. Many people are with you.
 
Many thanks, Andy! I feel that this is it. I will do this final big effort in getting this monster to work!
polska said:
I want to see this succeed. I chip in too. Keep it on track. Many people are with you.
Click to expand...

Skickat från min SM-A310F via Tapatalk
 
Good idea.

I have idea that others are probably thinking. Would it be possible to fund and make more than just one? I for one would gladly buy for my engine that sitting in the pieces. Would be awesome for supermoto/tarmac riding. More comfortable for distance riding. I have gut feeling that this time it will work flawlessly.
 
Amazing build Dr_C! Now, if you could only fit this in a standard FS650 frame I'd buy one. One could only dream…
 
In the meantime I have overhauled a BSA A10 gearbox for my Hedlund Café racer build. Extreemely satisfying to put this 65 year old bugger together with fresh bushings/bearings and glass blasted casings!
638aaabe61defc2ce7d140a7248af415.jpg


Skickat från min SM-A520F via Tapatalk
 
Just picked up the steel stuff! The sprockets are hardened. Now it's time to suck up to the alu machinist...
0b82f18a7bf7819aeb602c7d094f2c52.jpg


Skickat från min SM-A520F via Tapatalk
 

Similar threads

C
For Sale: 2008 FE 550 - Restored and Adventure-ready
Replies
0
Views
2K
canadius
C
C
For Sale For Sale: 2008 FE 550 - Restored and Adventure-ready
Replies
1
Views
678
canadius
C
C
For Sale 2008 FE 550 - Restored & Adventure-ready
Replies
0
Views
506
canadius
C
Taffy
New - improved carb needle 2004-2008
Replies
3
Views
2K
FlyingZebra
FlyingZebra
Taffy
Dell orto - just about everything was wrong....or was it the needle all along?
2
Replies
32
Views
8K
Mazzokie
M

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top