04 fe450 engine sound

Simas · Jul 15, 2018

Hi, it looks like something is wrong with my berg, it works too loud comparing to other same husaberg. Sounds come from left side. Oil bolt magnet looks covered too much also. Any suggestions what it could be?

max83 · Jul 15, 2018

Simas said:
Hi, it looks like something is wrong with my berg, it works too loud comparing to other same husaberg. Sounds come from left side. Oil bolt magnet looks covered too much also. Any suggestions what it could be?

I'm not an expert, maybe the timing chain?

Goose916 · Jul 15, 2018

Sounds like main bearings are about to let go. Unusually high amount of metal on the drain plug would give me cause to take a look.

ede · Jul 16, 2018

Hi,
I don't want to hijack this thread - short question - is this already a "high amount"?

mcljot · Jul 16, 2018

ede said:
Hi,
I don't want to hijack this thread - short question - is this already a "high amount"?

I've never seen anything in my oil screen, so I would suggest that that is a big amount. The magnet on my sump plug always has quite a lot of dust on it though.

Taffy · Jul 16, 2018

ede said:
Hi,
I don't want to hijack this thread - short question - is this already a "high amount"?

there's a lot of gum on it but not much metal - so 'no' would be my answer. wash it off and start again.

the noise reminds me of the balancer hitting the crank but other than that I can't say? check the crank nut is tight.

Taffy

ede · Jul 16, 2018

Taffy said:
there's a lot of gum on it but not much metal - so 'no' would be my answer. wash it off and start again.
Taffy

Thanks taffy, it's in the process...

04 fe450 engine sound

Help Support Husaberg:

Simas

max83

Goose916

ede

Attachments

mcljot

Taffy

ede

Similar threads

Register CTA

Recent Discussions

Recent Discussions