Husaberg fc400 1999 ignition.
- Thread starter Levshanov37
- Start date
Help Support Husaberg:
- Joined
- Mar 22, 2009
- Messages
- 1,386
- Location
- Portugal
Hi D1
For the 99 you don't have 4 wire CDI, it's the black box that you need.
You have 5 or 6, depending if it's an e-start bike or not. If it's not and you find a 6 wire CDI there is no problem, just don't use the withe wire.
Also you can use one CDI from 99 to 03
Here you have the 99 wiring, good luck
ZAGA
Attachments
Last edited:
- Joined
- Mar 22, 2009
- Messages
- 1,386
- Location
- Portugal
Hi D1
You can't mix the ignitions systems, yours is not a 99 bike, you have a 89-98 ignition.
To replace your coil you have here one aftermarket option:
HPI | Horse Power Ignition
It can't be worse that the original
ZAGA
You can't mix the ignitions systems, yours is not a 99 bike, you have a 89-98 ignition.
To replace your coil you have here one aftermarket option:
HPI | Horse Power Ignition
It can't be worse that the original
ZAGA
Hi D1
You can't mix the ignitions systems, yours is not a 99 bike, you have a 89-98 ignition.
To replace your coil you have here one aftermarket option:
HPI | Horse Power Ignition
It can't be worse that the original
ZAGA
What coil was used with the 89-98 stator, is it the black one?
Sent from my iPhone using Tapatalk
- Joined
- Nov 20, 2001
- Messages
- 17,028
- Location
- Ely, England
yes we have one my Russian friend! it is used.
please write to me away from here OK?
[email protected]
regards
taffy
please write to me away from here OK?
[email protected]
regards
taffy
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up