Help Support Husaberg:
- Joined
- Nov 20, 2001
- Messages
- 17,028
- Location
- Ely, England
Hello
I have a sprague bearing for you. 100132 at the web shop. we make this bearing stronger than original with a stronger spring around it.
look at the inside of the gear it runs in. it may have two grooves and they may be in very poor condition.
regards
Taffy
I have a sprague bearing for you. 100132 at the web shop. we make this bearing stronger than original with a stronger spring around it.
look at the inside of the gear it runs in. it may have two grooves and they may be in very poor condition.
regards
Taffy
- Joined
- Nov 20, 2001
- Messages
- 17,028
- Location
- Ely, England
Hello
do we have piston rings? no, not really. you must know first which make of piston is fitted. look for codes on the piston, numbers or letters. usually it is worthwhile just getting a new piston.
watch the little end, these wear on all Husabergs.
is this what you meant?
regards
Taffy
- Joined
- Mar 22, 2009
- Messages
- 1,386
- Location
- Portugal
Hi
If you need the Sprague from KTM 2008 is the same as yours
Another info is, the cams on your Sprague are the same as the newer spragues, and most of ktms, on the pre 2000 bergs you just have more cams, so they are interchangeable.
Hope it helps
ZAGA
If you need the Sprague from KTM 2008 is the same as yours
Another info is, the cams on your Sprague are the same as the newer spragues, and most of ktms, on the pre 2000 bergs you just have more cams, so they are interchangeable.
Hope it helps
ZAGA
- Joined
- Mar 22, 2009
- Messages
- 1,386
- Location
- Portugal
Hi
OK I confess, I'm a cheapskate
No, I'm not suggesting to buy 2 Sprague's, but if you just have some broken cams you can replace just those and you can get away it.
It's possible to source those cams from a number of ways, used and new, you can find them in suzukis, ktms, aprilias, ducatis, etc. Usually what changes are the number of cams. The cage of your Sprague usually doesn't have any problems.
For my 600, I've bought a nice used 08 ktm one.
Taffy, hope your secret source has improved his quality, if so, it is a nice option.
Cheers
ZAGA
OK I confess, I'm a cheapskate
No, I'm not suggesting to buy 2 Sprague's, but if you just have some broken cams you can replace just those and you can get away it.
It's possible to source those cams from a number of ways, used and new, you can find them in suzukis, ktms, aprilias, ducatis, etc. Usually what changes are the number of cams. The cage of your Sprague usually doesn't have any problems.
For my 600, I've bought a nice used 08 ktm one.
Taffy, hope your secret source has improved his quality, if so, it is a nice option.
Cheers
ZAGA
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up