Factory 17mm offset triple clamps

pollo · Sep 24, 2014

I got my triple clamps today. Yes they still make them upon demand.
Trick billet adjustable clamps. Im very happy about it. Part number for bottom
ending in 016 and top 017. They both are stamped with 017 ending.
Very cool. I imagine since they have the adjustable stem they are set at 16 with
18 option.
Im going with it as it is. I couldnt be happier.

Pollo

bushmechanic · Sep 25, 2014

very nice machining work on those clamps hey pollo

you got a proper socket set or 2 there as well

pollo · Sep 29, 2014

Thank you. Can someone tell me what offset option these clamps are?
Part number for the bottom is 80001031117 and top is 80001034117.
Its came set at the lower offset with option to rotate the stem for different offset.

pollo

Taffy · Sep 30, 2014

I can't see any eccentrics in the post fella?

17 it is then!

regards

Taffy

pollo · Sep 30, 2014

Thanks,
Heres a pic.
It does have an offset if you flip it 180*

Taffy · Sep 30, 2014

in that case you have 16/18mm clamps.

by changing the angle of the bike (usually through moving the forks up or down in the clamps) you can make 17s (kind of) if it ends up being what you think you need between 16 and 18.

regards

Taffy

pollo · Sep 30, 2014

Thanks Taffy, so I will go with the 16s to begin with along with the increased trail.
And I will raise the forks some to decrease trail and this way come closer to 17s.

pollo

Taffy · Sep 30, 2014

correct Pollo

nice one!

regards

Taffy

lindahl · Sep 3, 2024

Should it be any other bearings to this clamp? I have a metal ring on my new bearing.

Factory 17mm offset triple clamps

Help Support Husaberg:

pollo

Attachments

bushmechanic

pollo

Taffy

pollo

Attachments

Taffy

pollo

Taffy

lindahl

Attachments

Similar threads

Register CTA

Recent Discussions

Recent Discussions