Coil wiring, Husaberg 650

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 25, 2013
Messages
369
Location
canolbarth cymru
Can someone please help with the wiring on my supermono, I'm using a non standard coil and not sure which wires are which!
Blue block connectors connected.
White block connector to carb? (Won't be using this)
White and yellow wires with spade connectors?
White/blue wire with spade?
Black/yellow with bullet?
Brown with ring, earth?
Can anyone help?
Many thanks in advance
 
Hi

What bike is yours and what stator do you have ? Can you get a pict of the stator ?

It's probably 04+ ? correct ?

Would help

:cheers:
ZAGA
 
Engine is 2005+
Has the standard coil got a single wire? if so, what colour is this?
[attachment=2:1h9nme6d]brown ring (WinCE).JPG[/attachment:1h9nme6d]
3 wires from CDI?


[attachment=1:1h9nme6d]yello white wires (WinCE).JPG[/attachment:1h9nme6d]
Charging system?


[attachment=0:1h9nme6d]hus casing (WinCE).JPG[/attachment:1h9nme6d]
Uprated casing for cooling?
 

Attachments

  • brown ring (WinCE).JPG
    brown ring (WinCE).JPG
    8.3 KB
  • yello white wires (WinCE).JPG
    yello white wires (WinCE).JPG
    12.6 KB
  • hus casing (WinCE).JPG
    hus casing (WinCE).JPG
    10.1 KB
Hi

I'm not very familiar with that wiring, but looked at the owners manual 2005 (you can download that from husaberg.com)

From what I've seen on the diagram, only one black/white goes from the CDI to the coil. So that should not be a problem, or are you saying coil and you mean the CDI ?

But it looks by your pictures that you have every connectors out :D

Well if you look at the diagram you will see all the wires coming from or to the CDI:

brown - (with that ring) that is earth and it will go somewhere in the frame (some bolt)

blue/white - from CDI to the coil (it will charge the coil)

yellow/black - from CDI to the kill switch on your bar (it will stop the bike)

red/black + red/white - from the stator to the CDI (it will provide power to the cdi)

green + red - from pickup (thing near stator) to cdi (it will give timing to the cdi)

blue + yellow + black - from tps (carburettor) to cdi (it will give cdi information about your throttle position and it will change your cdi advance curves accordingly to that)


You also have from the stator yellow + white that will go to provide your battery and lights with power.

Those are the important ones, hope it helped, if you have more questions just shoot !

:cheers:
ZAGA
 
Very good :bounce3:

If you need anything more let us know

:cheers:
ZAGA
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top