Husaberg 2003 Fe650 Broken teeth in engine

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A

Arne Gandrud

Joined
Oct 11, 2012
Messages
5
I just bought a Husaberg FE 650 2003. And Some teeth are broken on the clutch hub. And two theeth on the free wheel inner sprocket. (And the kickstart shaft is broken)

What KTM parts fits? And should i just buy a slipperclutch?
 

Attachments

  • 51853_10152184899970654_18525806_o.jpg
    51853_10152184899970654_18525806_o.jpg
    49.5 KB
  • 458640_10152184898985654_1866097468_o.jpg
    458640_10152184898985654_1866097468_o.jpg
    54.7 KB
what happens is that the clutch basket teeth that are damaged will break off the freewheel gear teeth EVERYTIME until you grind all the high points that are damaged off the basket teeth. and remember, a tooth is like a man's jaw: if you hit one side it is the 'unseen' opposite side that now juts out. that is the danger point.

you must be absolutely certain that you have a 2001 or that you have a 2002-2008. the easiest way is to look behind the two similar gears (crank and intermediate) for their part numbers. if you have a 2001 you can't get the freewheel gear for the electric starter anymore. they have finished making it.

regards

Taffy
 
13 theeth inner free wheel and 47 on the outer hole...
The seller told me its a 2003.... And it stands in the papers... But... The enginenumber is not there... maby the side cover have been switched...??
Yes the seller just replaced the freewheel... But not the clutch...

only number in the engine i can see is 0216 upside down. between the kickshaft and the clutch house
 
streetbike said:
The "toothing" are different between 2001 and 2002-08 ?
Click to expand...
100% correct. it is the cut of the teeth. mix these two and you get a dreadful 'whine' in the engine.

as I say, the best way to tell is to remove either oif the two gears and look at the part numbers on the back of them. if you have no whine, you break the teeth then you look at the part number on the back of either of the gears and read your parts book.

it is difficult to think that someone selling a 2003 engine has some parts from 2001 in it? but when you start it: YOU WILL HEAR IT!

regards

Taffy
 
It sounded great... Until the awfoull sound of the theeth rambling around...

Do you mean that i should devine the engine in the middle, so the gears come out in daylight??
 
Its a 2003 because the drainplug came in 2004, and i have two oildrainingplugs. One with a magnet and one with a filther...
 
I have a 2007 FE650 and it has a drain plug with a magnet, plus a drain plug with a screen filter.
 

Similar threads

D
Husaberg 2003 sm650 convert to fe650
Replies
5
Views
545
Taffy
Taffy
1
70degree engine and clutch slave bleeding...
Replies
4
Views
1K
tpayne
T
W
For Sale 2006 Husaberg FE550E for sale in July
Replies
7
Views
1K
BBQkidd
B
K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
M
For Sale 650fe super moto for sale
Replies
3
Views
1K
MattH
M

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top