unknown part?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
P

Peej

Joined
May 4, 2010
Messages
46
Hello, im new to this site and this is my first husaberg which i brought with a faulty gearbox. im repairing the fault and plan to use the bike this summer. whilst stripping the engine down i found a part on the bench that i have no idea about so was hoping someone could help.
also im after some gearbox parts if anyone has anything for sale
 

Attachments

  • ABCD0003.JPG
    ABCD0003.JPG
    8.5 KB
don't recognize it, but it would be nice to know what year/ model. also, what was apart when it appeared. a ruler next to it would be better since i'm not familiar with the size of whatever country's coin that is.
 
its from a 2002 fc 470 i had just took the rocker cover off when i found it, as for size its about 10mm across
 
it's out of the end of your clutch pushrod hole in the clutch pressure plate.

how has the clutch engagement felt?

I also have loads of new and used gearbox parts so give me a call or email me.

regards

Taffy
 
thanks for the reply..
I did take the clutch slave cylinder off to remove the engine from the bike... im guessing this goes between the slave cylinder and the pushrod?
 
no, read my lips....in the pressure plate end. try and feed it in at the right and get it too the left end ok?

regards

Taffy
 
I'm guessin' the wheel on the end of the spring loaded doo-hickey that rolls around the gear selector star.
Just as a matter of interest - what's the gearbox trouble?

Coastie
 
the orignal problem was that the bike wouldnt engage 3rd gear it has now been stripped, the original problem was a selector fork but that has took the dogs off 2 of the gears
 
this reminds me of 2002. me versus JD.

i have to pretend to be calm otherwise i sound slightly mad. if I let go: i sound demented.

calm.....calm.....calm.

regards

Taffy

i talk to the trees they to take me away!
 
i think taffy is trying to tell you something... and everyone else for that matter, aren't you taff?!
 

Similar threads

M
FE570 Ran without oil - damage
Replies
3
Views
1K
minifk
M
K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
N
2000 Fe 600 ignition problem
Replies
0
Views
994
Nakkivarma
N
T
Anyone able to ID this FE 570 connector?
Replies
8
Views
788
rikschipp
R
Bengy22
For Sale 2011 Fe570 parts
Replies
4
Views
1K
Bengy22
Bengy22

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top