This information for Husaberg part numbers and non-OEM equipment is for the Husaberg 400/450, but should work for other Husaberg motorcycles. These upgrades for your Husaberg motorcycle include better OEM parts coming from KTM, Husqvarna, Honda, and Yamaha.
Heavy Duty Cam Chain
Use Regina CHR chain from earlier models. 501 89-93 H-200.045.01. The Regina CHR chain is dark and will last for a very long time!
Heim Bearings
Same as KTM top and bottom of shock. The Heim joint is the same as KTM Part No. 50304090044 Heim Joint Kit $52 USD. Reuse your collars, flip the seals, and pack the cavity with water proof grease. Discard KTM kit seals and collars. (Viking)
Pads Front and Rear
Try to get “poor” for the rear, otherwise will be too strong. Get the Gold Fren Sintered K5 material – Part No. 31 – the initial bite beats EBC and Brembo. And modifying the lever adjustment will change the feel completely. Outwards make it wooden, but full; while close is soft, with ‘feel’.
Year 2000 Clutch
The Moose clutch for KTM 4-strokes is an exact fit on 2000 FE400E. All of the parts will fit in the factory basket with no problems or alterations needed. (Moose Part Numbers) Friction Plates: F705505-7 Springs: FHDS87-6 Steel Plates: M807505-8
Oil Filters
HF 155, Champion X320
Rockers
These should be the same as Husqvarna motorcycles.
Cam Followers
These should be the same as Husqvarna motorcycles.
Fork Protectors
The fork protectors are the same ones fitted to Honda CR125/250/500s from the 1990’s. See here. (tuts)
Front Sprocket
These should be the same as Husqvarna 2-stroke motorcycles. They are nearly the same as the 4-strokes, but will need a small shim. (Brad)
Starter Motor
Use the starter motor from the Honda CBR 600 F4, Yamaha FZR 600, or Yamaha R6. The splines are the same and will do the job for a fraction of the cost. (Scully)
Fork Dust Caps
To keep mud out, the Honda CRF 450 fork dust caps are a big improvement. (Scully)
Fork Guards
Honda CR ones will fit, as well with Honda hose clamp. (midwest)
Yamaha FCR Parts
Needles:
- EKQ: 5JG-14916-E1
- DRQ: 5GS-14916-R1
- DTQ: 5BF-14916-D1
- DUQ: 5TJ-14916-D1
- CVQ: YZ 450 part # ?
Starter / Choke Jet Codes:
- All start: 3TJ-1494F-(eg21)
And then as follows:
- 14: #66
- 15: #70
- 16: #72
- 17: #75
- 18: #78
- 19: #80
- 20: #82
- 21: #85
Bearing Numbers
This information for Husaberg part numbers and non-OEM equipment is for the Husaberg 400/450, but should work for other Husaberg motorcycles. These upgrades for your Husaberg motorcycle include better OEM parts coming from KTM, Husqvarna, Honda, and Yamaha.
