flywheel-3-line-on-stator

Forget the white blob by the owner, you can see the deep groove has been painted white. This is your timing mark on the stator. Move the old TDC marks down to BDC and fit the 'dead-stop' tool and also a screw with a pinch nut and a little pointer in the direction of the center of the crank.

Forget the white blob by the owner, you can see the deep groove has been painted white. This is your timing mark on the stator. Move the old TDC marks down to BDC and fit the ‘dead-stop’ tool and also a screw with a pinch nut and a little pointer in the direction of the center of the crank.