2009 FE570 320mm Front caliper bracket

Sal Khan · September 7th, 2018, 03:29 PM

I've been searching for 2 weeks and have been through 3 different brackets trying to figure this out and I'm at my wits end.

I'm trying to find a 320MM Caliper relocation bracket for my 2009 FE570 so I can use my Supermotowheel. The last one I tried was the an EBC BRK012 but the holes for the pins are just too far apart. I know some KTM parts will fit and if I have to drill and tap a hole for the speed sensor I will but I have no idea what will actually fit properly.

The stock caliper is a Brembo A359.00 and I'm pretty sure that's correct and works properly.

Not sure if anyone will see this but thank you!

Leigh · September 7th, 2018, 10:39 PM

I will be following this as i'm having exactly the same problem so hopefully someone out there can help us out.
Sorry for hi-jacking your post but its driving me mad as well.

Alan · September 8th, 2018, 03:44 AM

https://www.aliexpress.com/wholesale...+320mm+Bracket

Taffy · September 9th, 2018, 11:52 PM

that part is showing still available boys if you want me to try?

Taffy

Mel N · January 27th, 2019, 02:51 PM

I am having the same issue. I got a 270 mm front disc for my 2006 FE450. I’ve tried 2 brackets so far that should have fit but didn’t. I need one that is about 66mm between the guide pins.

Alan · January 27th, 2019, 05:10 PM

Originally Posted by Mel N

I am having the same issue. I got a 270 mm front disc for my 2006 FE450. I’ve tried 2 brackets so far that should have fit but didn’t. I need one that is about 66mm between the guide pins.

Ill measure the ones i have here. They are easily available. You just need to know which one to order.

Aliexpress is the only place where they arent trying to rip you off on these.

Alan · January 27th, 2019, 05:29 PM

Originally Posted by Mel N

I am having the same issue. I got a 270 mm front disc for my 2006 FE450. I’ve tried 2 brackets so far that should have fit but didn’t. I need one that is about 66mm between the guide pins.

The mounting bolts to the forks is what you should be going by.

Mel N · January 28th, 2019, 02:58 AM

The mounting bolts to the fork is not my issue. It is the spacing between the guide pines between the bracket and caliper. I bot a couple from EBay and the spacing was about 66 mm which is wrong. Spacing on my bracket is about 79 mm. My bracket # 22.7610.00. I got AliExpress to measure on the is listed for my bike but it was wrong. I think Husaberg uses 2 different set up with no traceability.

Vandor501 · January 28th, 2019, 04:09 AM

Have you tried to fit a KTM powerparts bracket? I put on one my 08 fe450 and fit perfectly with the the addition of 2 small washers for the bolts not to catch on the disc pins (floating 320 disc)

The first pic is actually an xtra one i have laying around..

Skickat från min SM-G950F via Tapatalk

Vandor501 · January 28th, 2019, 04:11 AM

Originally Posted by Vandor501

Have you tried to fit a KTM powerparts bracket? I put on one my 08 fe450 and fit perfectly with the the addition of 2 small washers for the bolts not to catch on the disc pins (floating 320 disc)

The first pic is actually an xtra one i have laying around..

Skickat från min SM-G950F via Tapatalk

Btw the spacing should be about 79mm.