Go Back   Husaberg Forum > Mechanical and Technical > Wheels and Tires

Wheels and Tires Wheels and Tires - Everything from brakes to sprockets

LinkBack Thread Tools Display Modes
March 30th, 2017, 06:43 PM   #1
Senior Member
pollo's Avatar
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 1,086
Thanks: 98

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
Behr front 17" wheel

Well I just put in the order for an almost new 3.5x17 Behr wheel.
It cost me about $370 which doesn't seem to bad considering the circumstances.
The options were either to buy used ??
Buy new for about $660
Piece together parts from an 05 625 SMC for around $520

Or what I did. The Hubs are the same part numbers so I bought a
2006 Husaberg front wheel that was dented for $110.
I will use the Hub and Nipples with new Spokes and the new Black Rim
which I will strip and polish as I did before. $260 for the Rim and Spokes.

Where there's a will there's a way...
Just giving ideas for those of you wanting to do the same

pollo is offline  

  Husaberg Forum > Mechanical and Technical > Wheels and Tires

behr front 17, wheel

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Trade: Wanted 3.5x17 Behr wheel pollo Classifieds 0 December 8th, 2016 05:02 PM
For Sale: Behr 5x17 Cush wheel pollo Classifieds 2 November 17th, 2016 04:39 PM
For Sale: WANTED: 3.5 x17 Behr wheel pollo Classifieds 2 October 3rd, 2016 05:42 PM
For Sale: 5 x 17 Behr wheel pollo Classifieds 6 September 15th, 2016 04:44 PM
2008 FE-550 Rear wheel "cross match" or build Hawaii-Rider Wheels and Tires 4 December 31st, 2013 03:40 PM

Facebook Twitter Google+ RSS Feed