Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Wheels and Tires

Wheels and Tires Wheels and Tires - Everything from brakes to sprockets


Thanks Tree12Thanks
Reply
 
LinkBack Thread Tools Display Modes
September 23rd, 2016, 08:22 AM   #1
Member
 
Petros67's Avatar
 
Joined: Oct 2014
From: Greece

Posts: 69
Thanks: 34

I Ride: FS 650 2003 SM & FE 470 2002 ENDURO & FC 350 2014 MX
Husaberg FE 650 convertion to supermoto wheels

I want to make my FE to FS......

Would any one know if I can fit to my Berg FE 650 2003 below wheels with out clearance issues to my front or rear swingarm ???

These are BEHR OEM from KTM 690 SMC 2007 model with oem hubs and not cheap , due to they are abroad can not test them on my bike prior purchase.

Part No :
7500900104430 Front Wheel 3,5X17" 07
7501020104430 Rear Wheel 5X17" 07

And please advise any info if I can fit a four piston caliber with 320 rotor off same bike or any feedback how to do this is welcome.

Please chip in feedback on this.


Petros
Petros67 is offline  
 
September 23rd, 2016, 09:11 AM   #2
Senior Member
 
pollo's Avatar
 
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 999
Thanks: 72

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
The Ktm 690 rear hub is 10mm wider and will not fit. Not sure about the front.

pollo
Thanks from Petros67
pollo is offline  
September 23rd, 2016, 09:35 AM   #3
Member
 
Petros67's Avatar
 
Joined: Oct 2014
From: Greece

Posts: 69
Thanks: 34

I Ride: FS 650 2003 SM & FE 470 2002 ENDURO & FC 350 2014 MX
Originally Posted by pollo View Post
The Ktm 690 rear hub is 10mm wider and will not fit. Not sure about the front.

pollo
Thanks Pollo.

So if that is the case , I'll take out the KTM hub and install the KTM 640 cush hub I bought ???

Any one know ?? would this be an option.

KTM 640 cush hub



Petros67 is offline  
September 23rd, 2016, 10:23 AM   #4
Senior Member
 
pollo's Avatar
 
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 999
Thanks: 72

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
Im pretty sure they still sell the. 5" rim and spokes which would be cheaper than the whole 690 rear wheel.
The rim may only come in black though.
Thanks from Petros67
pollo is offline  
September 23rd, 2016, 11:04 AM   #5
Member
 
Petros67's Avatar
 
Joined: Oct 2014
From: Greece

Posts: 69
Thanks: 34

I Ride: FS 650 2003 SM & FE 470 2002 ENDURO & FC 350 2014 MX
Originally Posted by pollo View Post
Im pretty sure they still sell the. 5" rim and spokes which would be cheaper than the whole 690 rear wheel.
The rim may only come in black though.
I asked the seller to measure the hubs on the SMC 690 , I measured again
mine ( LC4 640 rear I bought ) and it measured 18mm across ,
so with abv saying the SMC 690 if wider 10mm should measure 28mm ???
Also my front hub measures 12mm.

My ideat to make my bike motard has become a sience senario , as I have to figure out the breaks too after , want a four pot caliber and 320 rotor.
Petros67 is offline  
September 23rd, 2016, 11:25 AM   #6
Senior Member
 
pollo's Avatar
 
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 999
Thanks: 72

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
The sell a caliper relocator bracket to run the 320 rotor. You would just need to search for it.
Im pretty sure the Husaberg hub needs to measure 7 1/8 inches by running a tape measure through the hole from the outside to outside of both spacers.
pollo is offline  
September 23rd, 2016, 11:29 AM   #7
Senior Member
 
pollo's Avatar
 
Joined: Jun 2008
From: Simi Valley Ca.

Posts: 999
Thanks: 72

I Ride: 2006 FS650e, 2007 FE550e, 2016 Ktm500Exc
The axle diameter may be the same. I am talking about the width of the hub fitting between the swingarm
pollo is offline  
September 24th, 2016, 05:09 AM   #8
Member
 
Petros67's Avatar
 
Joined: Oct 2014
From: Greece

Posts: 69
Thanks: 34

I Ride: FS 650 2003 SM & FE 470 2002 ENDURO & FC 350 2014 MX
Does any one know if I can fit to my enduro Husaberg a complete front system off a KTM SMC 625 2007 ???
This set is complete triple , front USD with the brembo caliber installed on it with front axel.

I found a complete front off a damaged engine bike ,
this way I can use the four pot brembo caliber brake with 320 rotor and install a front wheel off a KTM LC4 640 which I have already.

Would this modification work ??? This way I will have a tard Brembo 4 pot caliber and can fit the 320 front disc staight on. Correct ???

I'm trying to spent the less feasible money I can for this convertion by finding top good used parts.


Any comments on this would be highly appreciated.

Last edited by Petros67; October 22nd, 2016 at 10:47 AM. Reason: wrong link
Petros67 is offline  
September 27th, 2016, 01:19 PM   #9
Member
 
Petros67's Avatar
 
Joined: Oct 2014
From: Greece

Posts: 69
Thanks: 34

I Ride: FS 650 2003 SM & FE 470 2002 ENDURO & FC 350 2014 MX
After a lot of searching , and info from Pollo ( thanks ) the rear hub off the SMC 690 2007 is wider and will not fit the Husaberg 650.

Just bought this fron wheel Behr brand new 17 X 3,5



To be continued ............

Last edited by Petros67; October 22nd, 2016 at 10:48 AM. Reason: change
Petros67 is offline  
October 22nd, 2016, 10:22 AM   #10
Member
 
Petros67's Avatar
 
Joined: Oct 2014
From: Greece

Posts: 69
Thanks: 34

I Ride: FS 650 2003 SM & FE 470 2002 ENDURO & FC 350 2014 MX
After many attempts and tests to perform my 650 to motard ...........



After lots of thinking ,
I wanted to have a Berg Enduro bike too but not such powerfull as the 650 for the dirt ,
so I bought a FE 400 ..... and will convert the 650 to SM.
The 400 has FCR , Acrapovic silencer , SM brake set up so will switch its complete front and replace with 650 enduro set up such as front , rims etc ...






As I have purchased my SM wheels already these excel rims 17 x 3 & 17 x 4.5 with oem cushion hub only painted blue colors will be soon up for sale , if any one interested ?? PM me
Same goes for sale the four piston KTM SMC Brembo caliber with front brake pump as is set.

Last edited by Petros67; October 22nd, 2016 at 10:51 AM.
Petros67 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Wheels and Tires

Tags
650, convertion, husaberg, supermoto, wheels



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want To Buy: supermoto wheels gixer Want To Buy 0 January 1st, 2015 11:23 AM
FS550 convertion to FE550?? jaymee Husaberg 0 October 1st, 2012 09:24 AM
supermoto wheels Bucklee Suspension 3 September 29th, 2006 09:43 AM
Supermoto wheels for Husaberg Semtexsam SuperMoto 27 April 21st, 2005 07:32 AM
Supermoto wheels Semtexsam Husaberg 3 May 12th, 2004 03:08 PM


Facebook Twitter Google+ RSS Feed