Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Wheels and Tires

Wheels and Tires Wheels and Tires - Everything from brakes to sprockets


Reply
 
LinkBack Thread Tools Display Modes
March 26th, 2016, 12:13 PM   #1
Senior Member
 
Joined: Dec 2006
From: Roseville, MN

Posts: 228
Thanks: 7

I Ride:
Can you tell the front master cylinder diameter by looking?

Hey all,
My 07' is not exactly stock.
Is there anyway I can tell the front master cylinder diameter from the outside, without measuring the bore?
Thanks!
mud400 is offline  
 
March 26th, 2016, 03:41 PM   #2
Senior Member
 
Joined: May 2002
From: Snowy Mountains NSW Australia

Posts: 1,543
Thanks: 96

I Ride:
Should be a number cast on it, normally on the underside. Last 2 digits should be the bore size, eg 11 and it should make sense.

A few should there, but usually works.
steve is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Wheels and Tires

Tags
cylinder, diameter, front, master



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch master cylinder.....? help! canolman Husaberg 3 January 6th, 2014 01:13 PM
Beringer Master Cylinder jlburgess SuperMoto 6 May 22nd, 2011 09:30 AM
Master cylinder identification .... ?? HeLp ! on-one-wheel Husaberg 4 February 16th, 2009 03:21 PM
Master cylinder? Barrett SuperMoto 16 November 5th, 2008 01:54 PM
FTE master cylinder problems sibbo SuperMoto 9 April 3rd, 2007 11:51 AM


Facebook Twitter Google+ RSS Feed