Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Wheels and Tires

Wheels and Tires Wheels and Tires - Everything from brakes to sprockets


Reply
 
LinkBack Thread Tools Display Modes
October 21st, 2012, 12:04 PM   #1
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,385
Thanks: 247

I Ride: KTM 300 XC
WANTED - rear hub or wheel

Hi all

Todays ride finished sooner, as it can be seen
[attachment=0:hidhwqvm]Rear_hub.jpg[/attachment:hidhwqvm]

My bike is a 02 400, I'm looking for one used rear hub or complete wheel. If someone has one please post.

From what I've read here at UHE, the KTM for 01-08 will fit, but the 01-02 are no good. Could someone confirm this info ?

Thanks

ZAGA
Attached Thumbnails
WANTED - rear hub or wheel-rear_hub.jpg  
zaga is offline  
 
October 21st, 2012, 03:43 PM   #2
Senior Member
 
Bergini's Avatar
 
Joined: May 2011
From: Wisconsin, U.S.

Posts: 700
Thanks: 3

I Ride: 1995 dakota 408 5spd 8 3/4 rear end
Re: WANTED - rear hub or wheel

I have a spare hub/wheel for my 600 hundred zaga if it works i could send you some pics, ill give you a deal too
Bergini is offline  
October 22nd, 2012, 01:11 AM   #3
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,385
Thanks: 247

I Ride: KTM 300 XC
Re: WANTED - rear hub or wheel

Hi Bergini

It doesn't fit, those are the old ones, I also have spare wheels for my 600, but it needs to be after 2000.

Thanks any way


ZAGA
zaga is offline  
October 22nd, 2012, 01:33 AM   #4
Member
 
Joined: Dec 2011
From: north west, england

Posts: 69
Thanks: 2

I Ride:
Re: WANTED - rear hub or wheel

hi zaga

what is so different about an old wheel??
i have used the rear wheel off my 94 600 on my 02 650 and it was a straight swap. i used the 94 spacers aswell .
hope this helps

cheers kris
kris650berg is offline  
October 22nd, 2012, 01:51 AM   #5
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,385
Thanks: 247

I Ride: KTM 300 XC
Re: WANTED - rear hub or wheel

Hi Kris

Thanks a lot for the info, I have one spare for my 600, I will try it so I can ride until I find one for the 400.




ZAGA
zaga is offline  
October 22nd, 2012, 06:07 AM   #6
Member
 
Joined: Dec 2011
From: north west, england

Posts: 69
Thanks: 2

I Ride:
Re: WANTED - rear hub or wheel

hi zaga

if i remember right its the front that changes through the years with a bigger axle but the back is the same .
i have even used a 19" rear wheel from a 95 cr250 with only a change of spacers the sprocket and disc lined up perfect and the axle was the same size ( but this was only when i was really desperate lol )

cheers kris
kris650berg is offline  
October 22nd, 2012, 02:09 PM   #7
Senior Member
 
Bergini's Avatar
 
Joined: May 2011
From: Wisconsin, U.S.

Posts: 700
Thanks: 3

I Ride: 1995 dakota 408 5spd 8 3/4 rear end
Re: WANTED - rear hub or wheel

I am pretty sure kris650berg is right, my spare spare is from a 1994 something or other with a 20mm axle just like the 1997 600, i thought they used this size well into mid 2000's at least, you may ask why i have so many spare back wheels, i also frequently ask myself this same question i think if you try it you will find its a straight swap for the wheel but i did think that the spacing was slightly differnt for the newer swingarms but i could be wrong
Bergini is offline  
October 22nd, 2012, 06:41 PM   #8
Senior Member
 
Joined: Oct 2006
From: Vancouver Island, BC, Canada

Posts: 226
Thanks: 37

I Ride:
Re: WANTED - rear hub or wheel

Not mine

http://www.usedvictoria.com/classified- ... t_18039141
c337b is offline  
October 23rd, 2012, 12:50 AM   #9
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,385
Thanks: 247

I Ride: KTM 300 XC
Re: WANTED - rear hub or wheel

Hi

I took some measurements and I don't think that, to do it right, its a strait fit.

From what I've seen the overal width with spacers, the old one is 4,5 mm shorter and the distance between the sprocket and the branke disk, is also 4,5 mm shorter.

So, since the sprocket is in the right position I will make two 4,5 mm spacers, one for the axel and one for the disk.

Hope this will keep me riding until I find another wheel or hub.

I will make some picts and post


ZAGA
zaga is offline  
October 26th, 2012, 02:22 PM   #10
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,385
Thanks: 247

I Ride: KTM 300 XC
Re: WANTED - rear hub or wheel

So I've made two steel spacers

One for the disk - 146 X 112 X 4,5 [mm]
[attachment=1:2bjlkmnt]Disk_spacer.jpg[/attachment:2bjlkmnt]

Other for the axis - 40 X 20,5 X 4,5 [mm]
[attachment=0:2bjlkmnt]Axis_spacer.jpg[/attachment:2bjlkmnt]

It looks like a perfect fit

Now I can keep riding and searching for a hub !

I've looked on the parts manual and the rear hubs are <00 , 00 - 02 , 03 -08
Can someone tell me if we can change between the 02 and the 03 without great problems?


ZAGA
Attached Thumbnails
WANTED - rear hub or wheel-disk_spacer.jpg   WANTED - rear hub or wheel-axis_spacer.jpg  
zaga is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Wheels and Tires

Tags
hub, rear, wanted, wheel



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
KTM rear wheel RZmike95 Wheels and Tires 2 July 21st, 2011 05:54 PM
FE 4OO REAR WHEEL N FRASER Wheels and Tires 2 June 18th, 2011 04:36 AM
Left Handed Rear Brake, (Help Wanted) mark2e0 Husaberg 28 November 18th, 2010 07:37 AM
Wanted Rear Wheel theberganator Husaberg 5 April 9th, 2010 01:54 PM
Rear Wheel Cypriot SuperMoto 11 August 28th, 2006 12:19 AM


Facebook Twitter Google+ RSS Feed