Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Wheels and Tires

Wheels and Tires Wheels and Tires - Everything from brakes to sprockets


Reply
 
LinkBack Thread Tools Display Modes
May 19th, 2011, 11:02 AM   #1
Junior Member
 
Joined: Mar 2011
From:

Posts: 3
Thanks: 0

I Ride:
rear caliper guide pin help!

One of the caliper guide pins on the rear caliper is bent and is wearing the pads at an angle. I unscrewed it to try and straigten it out, but just mangled the threads. I searched bikebandit.com but the schematic doesnt show the pin as a single unit. It shows it as part of the caliper as a whole. I cant imagine you'd have to buy a whole caliper just for a new guide pin.

There is a part number on the list, #18, that calls it a "CUP SET SHORT". Is this the part I need to order? The schematic is a little misleading because of the name and the fact that it only point to one pin. Any input is much apprecitated.
jgixxer1 is offline  
 
May 31st, 2011, 12:11 AM   #2
Junior Member
 
Joined: Mar 2011
From: brisbane australia

Posts: 9
Thanks: 0

I Ride:
Re: rear caliper guide pin help!

best bet would be to call a dealer and ask them if they can get a replacement, surely they can get you one without the whole calliper

I had a worn one on my xr600 that we welded and ground back......turned out pretty good to
doddzie is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Wheels and Tires

Tags
caliper, guide, pin, rear



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Beringer caliper edoardo SuperMoto 11 November 30th, 2009 05:05 PM
BRO-10 or BRO-12 for Beringer 6 pot caliper? kerplunkwhoops SuperMoto 1 July 15th, 2009 12:58 AM
310mm Rotors for Berg 6 Piston Caliper and rear wheel size? rbott SuperMoto 2 June 12th, 2009 08:47 PM
2009 Husaberg Rear Chain Guide BLUE!! BOSS Marketplace 3 December 18th, 2008 11:59 AM
Rear Chain Guide squizz Wheels and Tires 1 May 21st, 2008 04:36 AM


Facebook Twitter Google+ RSS Feed