Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Wheels and Tires

Wheels and Tires Wheels and Tires - Everything from brakes to sprockets


Reply
 
LinkBack Thread Tools Display Modes
May 7th, 2009, 10:01 AM   #1
Junior Member
 
Joined: May 2009
From: Zagreb, Croatia

Posts: 2
Thanks: 0

I Ride: Ducaberg
Wheels from '01 KTM 620 SC will fit '07 FE-550 ?

Will they ?


Thank you,
Mario
OrMar is offline  
 
May 7th, 2009, 10:28 AM   #2
Senior Member
 
Joined: Aug 2007
From: Maryland - USA

Posts: 202
Thanks: 1

I Ride:
RE: Wheels from

KTM changed axle size in 2003 so they will not fit. 2003 and later wheels will fit.
SuperMotoMike is offline  
May 9th, 2009, 12:14 PM   #3
Member
 
Joined: Oct 2008
From: Sarnia, Ontario, Canada

Posts: 59
Thanks: 0

I Ride:
If your 620 has a 20mm front axle like other KTMs and Husabergs in 2001, then just order KTM part #SXS03540400. It's an adapter kit that allows the old wheels to fit on the new bikes. I have it right in front of me here. It comes with 2 sleeves that reduce the fork holes down to fit the old axle, and a new left side wheel spacer with a larger shoulder on it.

I haven't tried this kit out yet, but I'm planning to use it to mount my 2002 Berg front wheels on a 2008 KTM 250sxf when my broken wrist heals.

KTM used to make a kit to go the other way (new wheels on the old bikes), but I think it has been discontinued.
vwhusaberg is offline  
May 9th, 2009, 12:18 PM   #4
Member
 
Joined: Oct 2008
From: Sarnia, Ontario, Canada

Posts: 59
Thanks: 0

I Ride:
By the way the kit is only for the front, the rear should bolt straight on. I have not tested any of this but I did a lot of research, and this is what I came up with.
vwhusaberg is offline  
September 10th, 2009, 04:11 PM   #5
Junior Member
 
Joined: Aug 2009
From: Tennessippi, USA

Posts: 4
Thanks: 0

I Ride:
Originally Posted by vwhusaberg
....the rear should bolt straight on. I have not tested any of this but I did a lot of research, and this is what I came up with.
KTM rears have had the same axle diameter since the early 90's. Even the cush drives from the early LC4's will go right in.
gaspipe is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Wheels and Tires

Tags
620, fe550, fit, ktm, wheels



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
wheels rinty SuperMoto 1 March 24th, 2011 05:11 AM
08 wheels on 09 ? cypher Wheels and Tires 2 May 11th, 2009 11:24 AM
Are 1999 Fc 501 wheels and 1999 Fe600 wheels interchangeable toolmantom Husaberg 0 July 8th, 2008 06:17 PM
I need Wheels and help Cheekychops1111 Husaberg 4 April 23rd, 2007 08:06 PM
Wheels BrianSM SuperMoto 1 March 15th, 2006 12:33 PM


Facebook Twitter Google+ RSS Feed