Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Reply
 
LinkBack Thread Tools Display Modes
May 19th, 2020, 02:51 PM   #1
Junior Member
 
Joined: May 2019
From: Indiana

Posts: 22
Thanks: 1

I Ride: 95 Husaberg FE501
Engine Mounting/Swing arm bolts

Hello Gents, looking for some insight into the mounting of my 600 engine. My swing arm pivot bolt is to large and there is some kind of brass fitting in the mounting hole. Is this fitting removable or interchangeable for another size ?

Sorry canít figure out how to upload my pics.

Here is a link to my google drive.
https://drive.google.com/open?id=1uA...lzWMyq5l6bZzrR
AnticaHall is offline  
 
May 19th, 2020, 11:49 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,208
Thanks: 532

I Ride: Husaberg FE501e 2003
So how did you pull the pin out in the first place?

those bushes are meant to be shouldered so they can't work even if the ID was right. you're lucky that the originals are still available.

https://www.taffmeisters.co.uk/advan...f79de0&x=0&y=0

regards


Taffy
Taffy is offline  
May 20th, 2020, 06:05 AM   #3
Junior Member
 
Joined: May 2019
From: Indiana

Posts: 22
Thanks: 1

I Ride: 95 Husaberg FE501
Well I purchased this engine with plans of putting it on my frame. It did not come with Swing Arm Bolts when I purchased it.
AnticaHall is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
arm, bolts, engine, mounting, mounting or swing, swing arm bolt



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
GoPro mounting simmo Gear 20 November 9th, 2015 12:48 PM
04-08 Mounting The Timing Chain husabutt Mechanical 22 March 24th, 2015 09:55 PM
2009 Subframe Mounting bolts DaleEO Tech 14 January 2nd, 2009 05:37 AM
HELP! Cam/cam shaft gear bolts broke, what damage to engine steepisgood Mechanical 7 June 14th, 2008 11:45 AM
crack in right/rear engine mount at swing arm mars Mechanical 5 January 19th, 2006 01:09 PM


Facebook Twitter Google+ RSS Feed