Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Reply
 
LinkBack Thread Tools Display Modes
May 10th, 2020, 08:05 AM   #1
Junior Member
 
Joined: Jul 2019
From: Stockholm

Posts: 3
Thanks: 0

I Ride:
Where can i get the tools?

Currently tearing down an fs650 2005 but i am missing nr 13, 15 and 21.
Can't seem to find them? Anyone have any inside info?

13: 580.12.009.000
15: 590.29.033.000
21: 800.29.020.000
Attached Thumbnails
Where can i get the tools?-ska-rmavbild-2020-05-10-kl.-17.44.07.jpg  
Mindfaq is offline  
 
May 10th, 2020, 08:17 AM   #2
Member
 
Vandor501's Avatar
 
Joined: Jan 2019
From: Sweden

Posts: 44
Thanks: 4

I Ride: '08 FE450e Supermoto & '02 CR250R
Not sure where but 21 you can build yourself, 15 is just a normal bearing puller that you can buy at most hardware and tool suppliers and in most cases actually works pretty okay to remove the flywheel with if nr 13 is miising in the garage. But i Believe if you are handy enough you can probably make that one as well with the right set of tools if it's the only thing that can pull the flywheel.
I actually just punched out the waterpump bearing with a hammer and flathead screwdriver with some heating as well since I didn't find a inner bearing puller anywhere (#1

Skickat från min SM-G950F via Tapatalk
Vandor501 is offline  
May 11th, 2020, 12:42 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,017
Thanks: 494

I Ride: Husaberg FE501e 2003
well the 2005 doesn't need the plate. the flywheel pullers are available and the two legged puller is a waste of time as there's virtually nothing for it to do. I have the FWP and so will every KTM dealer.

the only tool there I wish I had other than the small flywheel puller is the one that looks like an enormous 'Y'. the inner race must be removed and that is an excellent tool for this.

the car world uses a similar tool for half-shafts.

cheers

Taffy
Taffy is offline  
May 20th, 2020, 04:37 AM   #4
Junior Member
 
Joined: Jul 2019
From: Stockholm

Posts: 3
Thanks: 0

I Ride:
Originally Posted by Taffy View Post
well the 2005 doesn't need the plate. the flywheel pullers are available and the two legged puller is a waste of time as there's virtually nothing for it to do. I have the FWP and so will every KTM dealer.

the only tool there I wish I had other than the small flywheel puller is the one that looks like an enormous 'Y'. the inner race must be removed and that is an excellent tool for this.

the car world uses a similar tool for half-shafts.

cheers

Taffy
Do you know the dimensions of the flywheel puller? I'm thinking about 3d printing it or if that doesn't work just order it online but i can't find the dimensions.

Thanks for the input!
Mindfaq is offline  
May 20th, 2020, 07:03 AM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,017
Thanks: 494

I Ride: Husaberg FE501e 2003
16,000th post.

the flywheel puller is M26 x 1.0mm

cheers

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
tools



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tools I Need jamesthedisciple Mechanical 3 October 15th, 2010 08:19 AM
tools... jaryrigged Husaberg 4 May 26th, 2008 02:35 AM
Essential tools SpikeHammer Husaberg 1 January 13th, 2008 06:28 AM
Special tools ??? sotosberg Husaberg 11 November 23rd, 2007 12:25 PM
Any one knows where to buy this Beta tools rica_roel Husaberg 1 June 14th, 2007 10:37 AM


Facebook Twitter Google+ RSS Feed