Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle

LinkBack Thread Tools Display Modes
June 11th, 2019, 11:35 AM   #1
Vandor501's Avatar
Joined: Jan 2019
From: Sweden

Posts: 61
Thanks: 11

I Ride: '08 FE450e Supermoto & '02 CR250R
- '08 Shift lever replacement

Recently looped out and broke the shift lever in half so after googling and searching i cant really find anything that definitly fits.

Anyone tried KTM or the '09+ models shift lever on older models?

I need one for my 08 450

Skickat från min SM-G950F via Tapatalk
Vandor501 is offline  
June 11th, 2019, 12:32 PM   #2
Joined: Jun 2016
From: Ireland

Posts: 65
Thanks: 9

I Ride:
I just replaced mine with the aftermarket one that Taffy sells for £23 (2008 FE550).
mcljot is offline  
June 12th, 2019, 01:00 AM   #3
Senior Member
Joined: Nov 2001
From: Ely, England

Posts: 16,554
Thanks: 626

I Ride: Husaberg FE501e 2003
yes 100140 on the web shop. the original steel is still good because the alloy aftermarket one bends in on a fall andd then proceeds to scrape the left case cover. the original steel lever - even though only 3mm away always returns to 3mm away.

the 09 would be a disaster on the Husaberg even if it did fit the splines because it would come out level with the OUTSIDE of your footrest, there is s-o-o-o much offset to it.

BTW, anyone reading this with a 2009-2012; I sell gear levers that are set in 10-12mm over original and out of the way. when i had a 570 the original "offset" was awful and nearly, it seemed to me, in the middle of the footrest...


Taffy is offline  

  Husaberg Forum > Mechanical and Technical > Tech

lever, replacement, shift

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
570 shift lever HusaPower Tech 1 March 15th, 2018 02:16 AM
Gear shift lever 04 550 520pilot Husaberg 3 June 12th, 2013 11:38 PM
Aftermarket shift lever? Dieselfool Mechanical 8 October 5th, 2012 04:05 AM
Shift lever Electrified Tech 5 November 25th, 2011 07:55 PM
Replacement gear/shift lever rubba Mechanical 5 August 13th, 2008 09:09 PM

Facebook Twitter Google+ RSS Feed