Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Thanks Tree2Thanks
  • 1 Post By Vandor501
  • 1 Post By Smash101
Reply
 
LinkBack Thread Tools Display Modes
April 23rd, 2019, 08:56 AM   #1
Senior Member
 
canolman's Avatar
 
Joined: Sep 2013
From: canolbarth cymru

Posts: 362
Thanks: 208

I Ride:
Clutch issue, not standard!

650cc, '06
Magura clutch
Road chassis, clip on handlebars.
Recent race meeting lost the clutch, the slave piston had twisted in the bore and the fluid lost in the engine I presume. Easy fix with new o-rings but it has shown up another problem.
Because of the handlebar position the fluid barely covers the piston so any loss introduces air into the system. Is there a mineral oil clutch assembly that uses a remote reservoir? Or should the rubber bladder prevent this?
canolman is offline  
 
April 23rd, 2019, 09:01 AM   #2
Senior Member
 
canolman's Avatar
 
Joined: Sep 2013
From: canolbarth cymru

Posts: 362
Thanks: 208

I Ride:
Clutch issue, not standard!-20190423_112404.jpg

Clutch issue, not standard!-20190423_113711.jpg
canolman is offline  
April 23rd, 2019, 09:03 AM   #3
Member
 
Vandor501's Avatar
 
Joined: Jan 2019
From: Sweden

Posts: 33
Thanks: 4

I Ride: '08 FE450e Supermoto & '02 CR250R
The rubber is to fill upp the space so minimal or no air should be present when filled up. But if you like to position it at that big of an angle id just bleed it properly in an upright position, assemble, then adjust angle to preferred.

There are xtra reservoirs but those are mostly for other pumps with out built-in. Maybe someone else have input on that part?

Skickat från min SM-G950F via Tapatalk
Thanks from canolman
Vandor501 is offline  
April 23rd, 2019, 11:48 AM   #4
Senior Member
 
Joined: Mar 2015
From: Melbourne, Australia

Posts: 192
Thanks: 65

I Ride: 2010 FX 450
Just as Vander said, level out your reservoir, top it up and reassemble, should be fine.


Sent from my iPad using Tapatalk
Thanks from canolman
Smash101 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
clutch, issue, standard



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
570 clutch issue HusaPower Mechanical 2 December 23rd, 2018 11:31 AM
Fe 450 210 - weird clutch issue Flip6 Mechanical 2 January 22nd, 2018 08:58 PM
Fe450 clutch issue Mordzy Mechanical 5 April 1st, 2015 11:23 AM
2004 fe 450 clutch issue weemo1rush Mechanical 3 October 24th, 2012 08:14 AM
'02 501 Clutch issue. husaferg Mechanical 5 June 11th, 2012 11:09 AM


Facebook Twitter Google+ RSS Feed