Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Reply
 
LinkBack Thread Tools Display Modes
October 20th, 2018, 05:52 AM   #1
Junior Member
 
Joined: Jul 2017
From: Russia

Posts: 26
Thanks: 0

I Ride:
Assistance in the cylinder head

Hello to all! Again, I ask for help. Whether prompt there are differences in a head of a tselindra and a valve of a cover of model 400 from 501 motors till 1999. and whether it is possible to put the head from 501 to 400.
D1man is offline  
 
October 20th, 2018, 05:54 AM   #2
Junior Member
 
Joined: Jul 2017
From: Russia

Posts: 26
Thanks: 0

I Ride:
and one more question. affects somehow the lack of legs and stevta decompressor in the head. what will happen if you do not put it.
D1man is offline  
October 20th, 2018, 05:42 PM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,441
Thanks: 402

I Ride: Husaberg FE501e 2003
hello

yes, there is a difference between the 400 and the 501/600 head. the 400 head is 31/27 and the 501/600 head is 35/30. the 35/30 head will be very nice on the 400! it is a straight fit.

the rocker covers are slightly different so a 1989-1995 head and rocker cover should stay together and 1996-2000 stay together.

the next problem is that the smaller valve heads have their pairs of valves closer together on the inlet side so you have different rocker arms between the 400 and the 501/600.

so you must look at the rocker arms changing as well! it is all possible though!

Not sure what your question about decompression is though? if it was me, I would always make the auto decompressor work and throw the manual and kickstart away.

Taffy
Taffy is offline  
October 21st, 2018, 12:14 AM   #4
Junior Member
 
Joined: Jul 2017
From: Russia

Posts: 26
Thanks: 0

I Ride:
Thanks for the answer. so I can put a head and a lid from 501 on my 400 and ride. Yes?
D1man is offline  
October 21st, 2018, 12:54 AM   #5
Junior Member
 
Joined: Jul 2017
From: Russia

Posts: 26
Thanks: 0

I Ride:
Головка в сборе с клапанами и коромыслами капот от 501.
D1man is offline  
October 21st, 2018, 01:04 AM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,441
Thanks: 402

I Ride: Husaberg FE501e 2003
yes
Taffy is offline  
October 21st, 2018, 04:29 AM   #7
Junior Member
 
Joined: Jul 2017
From: Russia

Posts: 26
Thanks: 0

I Ride:
Спасибо большое!!!! Вы очень помогаете!!!
D1man is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
assistance, cylinder, head



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want To Buy: 1997 FE 501 cylinder jug and head Abartho3 Want To Buy 0 November 13th, 2016 09:08 AM
Cylinder head weld? canolman Mechanical 1 April 29th, 2016 09:32 AM
Cylinder Head Failure, Need New zb00p Mechanical 3 December 8th, 2010 11:59 AM
cylinder head spiney Mechanical 6 September 7th, 2008 12:17 AM
Hole in cylinder head 04 450 DOLLARS Mechanical 0 May 2nd, 2004 01:16 PM


Facebook Twitter Google+ RSS Feed