Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Thanks Tree2Thanks
Reply
 
LinkBack Thread Tools Display Modes
March 17th, 2019, 03:55 PM   #11
Member
 
Joined: Jan 2008
From: h

Posts: 75
Thanks: 4

I Ride:
Just saw that both the upper-side mounts (behing the cam-chain tensioner and on the opposite side) are cracked on mine.
So which one is that have no need to replace or repair? Based on the comments its not clear for me which is which.
There was a thread about some carbon made mounts. I did't found yet but it'd urgent to solve this permanently.

Last edited by HusaPower; March 18th, 2019 at 01:33 AM.
HusaPower is offline  
 
March 19th, 2019, 03:07 PM   #12
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 538
Thanks: 265

I Ride: when I can which isn't often enough. FX450, FE570
The upper rear mounts can break. They need to be replaced when broken.

The frame to head mounts are those that others are saying should be removed.
Thanks from HusaPower
Alan is offline  
September 9th, 2019, 10:22 AM   #13
Member
 
Joined: Jan 2008
From: h

Posts: 75
Thanks: 4

I Ride:
So the cracked mounts were repaired and the head to frame mount was removed. I don't put in the bike more than 15hrs maybe less and both cracked again. And not just the mounts. The end of the axle (with the nut) which go trough the engine and swingarm cracked too. I don't no if there is any correlation of the two. The mounts are 30+$ each and don't see why would it last much longer..
HusaPower is offline  
September 12th, 2019, 08:23 AM   #14
Junior Member
 
Joined: Aug 2019
From: Dublin

Posts: 17
Thanks: 0

I Ride: Vtr sp1,Rrn ,Bros 663,FS 650
Maybe itís just me,but I would suggest putting the mounts you removed back in ,thereís obviously more stress on the ones that sheared with the fronts removed
Davyh is offline  
September 12th, 2019, 11:51 PM   #15
Member
 
Joined: Jan 2008
From: h

Posts: 75
Thanks: 4

I Ride:
Yes probably I'll put it back. But first it'd nice to hear why that mount is "inofficialy a mistake"?

Last edited by HusaPower; September 13th, 2019 at 02:57 AM.
HusaPower is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
570, crack, engine, mount



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
'09 FE450 Upper Engine Mount Problem? bkowal Mechanical 0 September 25th, 2013 01:05 PM
2009 FE570 Engine mount mod? colinmc400 Mechanical 6 July 22nd, 2009 07:55 AM
Small crack in engine mount on-one-wheel Tech 32 November 15th, 2008 05:07 PM
crack in right/rear engine mount at swing arm mars Mechanical 5 January 19th, 2006 02:09 PM
A crack is but a crack,until.... HeimirBardason Mechanical 12 June 21st, 2005 04:39 PM


Facebook Twitter Google+ RSS Feed