Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Reply
 
LinkBack Thread Tools Display Modes
November 17th, 2016, 05:32 AM   #1
Junior Member
 
Joined: Dec 2013
From: Louisiana

Posts: 2
Thanks: 0

I Ride:
2013 TE250 Subframe concerns.

Guys I'm currently on a 2012 TE250, and a friend has a 2013 TE250 that I've ridden. I really like the 13 better so I'm considering buying it. Those of you that have the 13/14 models how much trouble have you had with the subframe? I see that two of the three pieces that make up the subframe have superseded part numbers, would anyone know if there were improvements made? Thank you for any help you can offer.
Mike
Mike Maner is offline  
 
November 17th, 2016, 08:48 AM   #2
Senior Member
 
FE350's Avatar
 
Joined: Apr 2014
From: Chilliwack, BC, Canada

Posts: 512
Thanks: 173

I Ride: 2014 FE350, Beautiful Blonde
In 2014 Husa was discontinued and Husky took over in short, I am not aware of the superseded number but think this might have become the Husky part as they were the same in 2014. Only one issue I am aware of is the sub frame spreads at the rear dirt shield. It allows dirt and debris to enter the air box. It is not a big issue if you maintain regularly, but if it bothers than a quick bead of rv silicone solves the issue.
FE350 is offline  
November 17th, 2016, 10:16 AM   #3
Junior Member
 
Joined: Oct 2016
From: south africa

Posts: 3
Thanks: 1

I Ride: Husa 300 and 350
I have a 2013 FE 350, I presume the same subframe ( plastic one). The only issue I had is that it flexes and opens a gap on the airbox cover letting in water when going through rivers. I sorted it out with some good sealant and havent had a problem since
Drewk is offline  
November 17th, 2016, 01:53 PM   #4
Junior Member
 
Joined: Feb 2016
From: UK

Posts: 2
Thanks: 0

I Ride:
Mate, I had the same problem but found and copied a Spanish guy on Youtube who got a length of 6mm threaded stainless bar. drilled 2 holes either side of the airbox and with 20mm washers, clamped the two side until I'd a snug fit. Job done!
damianmullin is offline  
November 20th, 2016, 06:54 AM   #5
Junior Member
 
Joined: Dec 2013
From: Louisiana

Posts: 2
Thanks: 0

I Ride:
Guys I appreciate your help on this.
Mike
Mike Maner is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
2013, concerns, subframe, te250



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Just bought a new leftover 2013 TE250 TXThumper Husaberg 1 October 16th, 2015 01:33 PM
2013 TE250 Stator output ktmoto Electrical 0 November 24th, 2013 06:22 AM
2013 KTM 350exc SIX DAYS vs 2013 HUSABERG vs 2013 CRF X bontoa Husaberg 3 September 27th, 2012 09:53 AM
New Bergs: Any concerns??? duckracer Husaberg 2 October 31st, 2009 05:11 PM
Jetting / fuel concerns. goatman Fuel 21 May 3rd, 2008 06:54 PM


Facebook Twitter Google+ RSS Feed