Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Thanks Tree1Thanks
  • 1 Post By husabutt
Reply
 
LinkBack Thread Tools Display Modes
February 17th, 2016, 03:36 PM   #1
Junior Member
 
Joined: Feb 2016
From: Hartville, Ohio

Posts: 20
Thanks: 4

I Ride: Mostly dirt, mx,woods, etc...
1999 FE501E sidestand

Need a sidestand for a new to me Berg.
Will the new Apico aftermarket side stands bolt on my 99 501?
Tjswigger is offline  
 
February 17th, 2016, 10:59 PM   #2
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 2,832
Thanks: 208

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
No. You will probably need to find a clamp on side stand like this one CLAMP-ON SIDE STANDS | Product | Moose Racing and modify it as needed.


Thanks from tourist
husabutt is offline  
February 19th, 2016, 04:58 AM   #3
Junior Member
 
Joined: Feb 2016
From: Hartville, Ohio

Posts: 20
Thanks: 4

I Ride: Mostly dirt, mx,woods, etc...
Thanks! Didn't want to buy new one until I was sure. Moose option is good ....and maybe an OEM one will turn up on eBay.
I will also look into KTM/ Husky or even Cagiva swap? Something may work with a little modification. Welder and a good close-up picture of an original one and I'm half way there!
Tjswigger is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
1999, fe501e, sidestand



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
What Plastic fits my 1999 FE501E Jaxberg Tech 6 December 14th, 2012 07:24 AM
"New" 1999 FE501e on ebay... DuaneB Husaberg 2 September 28th, 2011 06:23 AM
Sidestand Carl-H Husaberg 13 July 10th, 2009 04:40 PM
1999 FE501E opinions needed weareborg Husaberg 6 November 19th, 2007 12:15 AM
New owner for a 1999 FE501E TrevorHeath Husaberg 6 February 3rd, 2007 08:05 AM


Facebook Twitter Google+ RSS Feed