Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle


Reply
 
LinkBack Thread Tools Display Modes
November 16th, 2015, 11:47 PM   #1
Junior Member
 
Joined: Nov 2015
From: Israel

Posts: 2
Thanks: 0

I Ride:
Exclamation Silencer fitting problem. TE250 2t

Hello everyone.
Last night I have dissemble the Subframe off in order to clean the airbox.
After the airbox was shiny I have put it all back together (35Nm on the subframe scrows).

Now, the "ears" with the holes on the subframe can align with the holes on the silencer - it's like that the silencer can't go "deep" enough (it only needs about 4mm in order to fit).
The pipe is a bit bent, but before I have took the subframe off i have dissemble/reassemble the silencer few times.

What can be the problem?
Bardogo is offline  
 
November 17th, 2015, 09:07 AM   #2
Senior Member
 
WArdogG's Avatar
 
Joined: Jul 2012
From: South Africa

Posts: 205
Thanks: 76

I Ride: FS650 '08/FS650 '04/FE501 '03/FX470 '02
Check if the silencer is sliding into the header, move the rubber that sits on the join, also check if the header section has not moved during the disassembling of the subframe
WArdogG is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Tech

Tags
fitting, problem, silencer, te250



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
New 13 TE250.. kiwiberger Tech 2 January 15th, 2013 02:29 AM
First Ride TE250 fedge Husaberg 1 April 20th, 2012 05:00 AM
Problem fitting the clutch cover Conrad Mechanical 3 September 7th, 2010 11:12 PM
Jetting/settings after fitting 'silencer' on-one-wheel Fuel 8 January 15th, 2009 05:50 AM
Zorst Fitting Problem detroit Mechanical 2 August 22nd, 2007 11:38 AM


Facebook Twitter Google+ RSS Feed