Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle

LinkBack Thread Tools Display Modes
August 21st, 2015, 08:16 PM   #1
Joined: Mar 2014
From: Australia

Posts: 77
Thanks: 6

I Ride: 2010 FS570
Berg 570 Fuel tank removal

What is the easiest way of doing this? my bike doesn't run a rad fan if that makes things any easier?
Aido_570 is offline  
August 21st, 2015, 08:25 PM   #2
Senior Member
Joined: Aug 2011
From: Northern Nevada

Posts: 532
Thanks: 23

I Ride: Husaberg FE570S and Buell S3
Although the absence of a radiator fan does indeed eliminate a clearance problem at the right front "ear" of the fuel tank, there is really only one way to remove it: follow the instructions in either the owner's or service manual.
Ruger is offline  
August 21st, 2015, 08:28 PM   #3
Joined: Mar 2014
From: Australia

Posts: 77
Thanks: 6

I Ride: 2010 FS570
okay thanks ruger! i suspected as much.
Aido_570 is offline  
December 6th, 2016, 04:47 AM   #4
Joined: Dec 2009
From: Utah

Posts: 33
Thanks: 0

I Ride:
Besides the lazy answer, "follow the owners manual", can someone give some actual useful tips, tricks or guidelines on removing the tank?
Michelangelo is offline  
December 6th, 2016, 08:55 AM   #5
Senior Member
Joined: Nov 2011
From: Nordic countries

Posts: 1,056
Thanks: 486

I Ride: Two FE570 -12
Really the service manual shows the easiest way to do it

Pop the seat, remove the air filter and remove the shrouds. Unscrew the 6 screws holding the black frame (the one connecting the frame-tank-subframe). Unplug the connector to the fuel pump. Unplug the quick disconnect on the fuel line. Unscrew the screw at the top of the tank. Carefully lift it up forcing the air boot to pop loose.
Some remove or loosen the subframe. I see no reason to do it.

Make sure to put a clean rag or something in the intake and protect the quick disconnects.

A tip when you assemble it is to put the screw at the top of the tank in but do not torque it up before the black plastic frame is in place and torqued up. If not you can put some tension on the subframe and it can be hard to get the 6 screws in place.
jon andersson is offline  
December 9th, 2016, 08:03 AM   #6
Senior Member
Joined: Oct 2015
From: Sweden

Posts: 253
Thanks: 56

I Ride: FE450
Chainsaw works. And look in the manual how to install your new tank later!
Palle is offline  

  Husaberg Forum > Mechanical and Technical > Tech

570, berg, fuel, removal, tank

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
390 Tank Removal stoaty Tech 7 May 17th, 2012 07:45 AM
Fuel tank removal...Holy Crap !! odonnks Fuel 5 November 25th, 2011 05:01 AM
Fuel Tank Removal ? Kawasakifreak Fuel 2 February 26th, 2011 12:52 PM
2010 Tank Removal,no, I'll do that maintenance next week husapye Tech 0 March 10th, 2010 06:39 PM
Still a berg newbie - so how does the fuel tank come off? chilledspode Husaberg 12 December 11th, 2006 02:50 AM

Facebook Twitter Google+ RSS Feed