Go Back   Husaberg Forum > Mechanical and Technical > Tech

Tech Mechanical and Technical for the rest of your motorcycle

LinkBack Thread Tools Display Modes
April 19th, 2011, 05:14 AM   #1
Joined: Mar 2010
From: Colorado

Posts: 40
Thanks: 0

I Ride:
Clutch master cylinder leaking

My clutch master cylinder seems to be leaking near the lever adjustment on my '09 570. Is this a common problem that is easy to fix? Is it something I can disassemble and clean or do I have to buy a new master cylinder?
Juicifer is offline  
March 27th, 2015, 09:18 PM   #2
Whosaberg's Avatar
Joined: Jan 2014
From: Nanaimo BC

Posts: 53
Thanks: 15

I Ride: Husaberg FE390
I have the same problem. What was your solution?
Whosaberg is offline  
January 26th, 2016, 01:12 PM   #3
dgangle's Avatar
Joined: Jan 2013
From: Bham AL

Posts: 45
Thanks: 3

I Ride: 2016 KTM 250 & 350 XCF-W
Realize this is an old thread but I just went through this.

KTM and some aftermarket sources like Moose offer a rebuild kit. If you have a 9.5mm Magura the Moose PN is 1132-0912 and is ~ $30 USD

Install and bleed up through the bottom at the slave. Pumping will be very difficult is not impossible.
dgangle is offline  

  Husaberg Forum > Mechanical and Technical > Tech

clutch, cylinder, leaking, master

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Magura Clutch Master Cylinder Piston Removal fljar Mechanical 4 February 25th, 2015 02:28 PM
Clutch master cylinder.....? help! canolman Husaberg 3 January 6th, 2014 12:13 PM
FE 570 Clutch Master Cylinder Fluid Loss monstermaniac Tech 7 January 25th, 2013 11:35 PM
Master cylinder? Barrett SuperMoto 16 November 5th, 2008 12:54 PM
Clutch master cylinder: what fits? LeFrog Mechanical 1 October 15th, 2007 09:36 AM

Facebook Twitter Google+ RSS Feed