Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Suspension

Suspension Suspension and Handling Forum - bouncy bouncy!


Reply
 
LinkBack Thread Tools Display Modes
June 15th, 2020, 12:53 PM   #1
ede
Senior Member
 
ede's Avatar
 
Joined: Jul 2015
From: Germany

Posts: 137
Thanks: 127

I Ride: Husaberg FE 501 2002
Swingarm bearing / bearing sleeve FE 501 (2002)

Hi everybody,

long time no see, I unpacked the Berg after long time...
I remembered from the last ride somewhen in 2019 that the swingarm bearings were worn out.
Long Story short - swingarm out, axle out, bearing out, and under a thick clay crust I could find some needles... Sleeve completely rusted, seals scrapped, bearings rattling.

So I started looking for the parts. The original spacers aren't that great in my opinion, anyway, the bearings (drawn cup needle roller bearings HK2218-RS) and the sealing rings (SD 22x28x4) are standard parts and are available in good bearing shops. With the bearing sleeve/bearing inner ring it's more difficult:
* KTM - no longer available
* Neubert - nothing
* ProX swing arm bearing kit is still in the 2020 catalogue (Model 2004) but you can't order them via distributor.

They changed the swingarm to fit the KTM product line in 2005, and I guess it's not compatible with the older models, like 2002.

Does anybody know where I can find the right sleeve or bearing kits for:
Husaberg FE 5001 2002 model (bearing sleeve 22 x 16 x 50 or complete kit)


I am grateful for any good advice, I am running out of ideas...


Regards,
EDE
Attached Thumbnails
Swingarm bearing / bearing sleeve FE 501 (2002)-husaberger-2002_swingarm-bearing-exploded-assembly_text_eng.jpg  
ede is offline  
 
June 18th, 2020, 11:45 AM   #2
Member
 
mars's Avatar
 
Joined: Jun 2004
From: denton texas

Posts: 77
Thanks: 6

I Ride: 2010 KTM250SX, 2001 Husaberg FC550
EDE,

Try searching 28-1178, this kit is from "All Balls". there are many on eBay.

Mars
2001 Husaberg FC550
2010 KTM 250SX
2019 KTM 250 XC-W
mars is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Suspension

Tags
2002, 501, bearing, sleeve, swingarm



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cylinder Sleeve replating??? 2002 FX 470 RedRockRider Mechanical 5 November 12th, 2018 09:42 AM
shock/swingarm bearing kits 05 fe550 jimmythehat Suspension 5 December 26th, 2013 01:25 AM
2010 Fe 390 Swingarm bearing kits? Ezz Suspension 2 January 8th, 2012 10:35 PM
swingarm bearing kit, anybody else make them madpugs Suspension 4 May 25th, 2009 02:28 AM


Facebook Twitter Google+ RSS Feed