Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Suspension

Suspension Suspension and Handling Forum - bouncy bouncy!


Reply
 
LinkBack Thread Tools Display Modes
March 6th, 2018, 10:23 PM   #1
Member
 
Joined: Mar 2017
From: Vancouver, BC

Posts: 70
Thanks: 15

I Ride: 2008 FE 550
2008 FE 550 Rear Shock Lower Heim joint bearing cover replacement

Hi,

Took the 2 x covers off the lower joint/bearing. Bearing itself looks and feels good (no radial, lateral, or longitudinal play). But I damaged the two covers in the removal.

Don't need the whole bearing replaced - just those two cover rings. Looked high and low, and can't find those - anyone have a part number?

Again, no need for the whole bearing replaced, just the two covers.

thanks,

cm
canadius is offline  
 
March 6th, 2018, 11:16 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,378
Thanks: 394

I Ride: Husaberg FE501e 2003
here you go!

80004041000 and I THINK?????? they come with an O ring but I can;'t recall 100% ask about them when ordering but you do need an O ring.

cheers

taffy
Taffy is offline  
March 7th, 2018, 08:41 AM   #3
Member
 
Joined: Mar 2017
From: Vancouver, BC

Posts: 70
Thanks: 15

I Ride: 2008 FE 550
Hi Taff,

Thanks for the reply. I likely shouldn't have said "cover", the cover part in your number is not what I'm after.

The part I'm after is a rubber-coated ring seal-cover type part, and it covers the round / gimbal part of the Heim joint.

I brought it with me here at the office to try and source the ring - so I don't have a picture of it installed - but here is my quick and dirty drawing, with the actual part, and where it sits.

Thanks,

cm

PS: I say "it" - but there's a pair of them, one on each side of the shock's Heim joint.
Attached Thumbnails
2008 FE 550 Rear Shock Lower Heim joint bearing cover replacement-img_6594.jpg  

Last edited by canadius; March 7th, 2018 at 08:43 AM.
canadius is offline  
March 7th, 2018, 01:42 PM   #4
Member
 
Joined: Mar 2017
From: Vancouver, BC

Posts: 70
Thanks: 15

I Ride: 2008 FE 550
Ah - solved (I think).

SHAFT SEAL RING KGW D=32 (50180159).

Given that I've measured OD = 32/ID=25/H=7, I'm hoping that's the part.

Will advise when they arrive next week.

cm
canadius is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Suspension

Tags
2008, 550, bearing, cover, heim, joint, lower, rear, replacement, shock



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems removing lower shock bolt TDIPower Suspension 10 December 5th, 2017 12:18 AM
shock lower bearing part numbers? 76model Suspension 1 October 15th, 2017 05:08 AM
09 FE450 Rear Shock Joint BJM Suspension 6 May 10th, 2013 02:59 PM
Lower heim joint for Aussie owners. berglsmerg Suspension 2 July 27th, 2010 01:17 AM
KTM PDS upper on a Husaberg lower shock 2005FC550 Suspension 4 February 23rd, 2006 05:05 PM


Facebook Twitter Google+ RSS Feed