Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Suspension

Suspension Suspension and Handling Forum - bouncy bouncy!


Reply
 
LinkBack Thread Tools Display Modes
November 19th, 2017, 04:23 PM   #1
Member
 
Joined: Jan 2008
From: bergland

Posts: 58
Thanks: 0

I Ride:
Wider triple clamps? FS570

I just got a brembo front caliper with which 2014- husqis are equipped. Mount it was easy but accidentaly the way of the fitting process was clean, no spokes... till the wheel (16,5) turned. The neg. clearence is too big to compensate it with washers and/or make it true to the side a bit (which doesn't seem a good idea). So t. clamps... if I get one from a exc for example -which probably has the biggest chance- than what have to be done to mount it with the factory gíven angle setup? Maybe other solutions? Thank you.
HusaPower is offline  
 
November 19th, 2017, 08:26 PM   #2
Member
 
Joined: Jul 2016
From: Qc, Canada

Posts: 47
Thanks: 26

I Ride: CBR250 MC22, Aprilia RSV 1000, Husaberg 570 hybrid supermoto/snowbike
Pretty sure they are all the same width. Supermoto calipers usualy don't fit with the motocross wheels. And i'm not sure you can use the 260mm motocross brakes with a supermoto wheel. Mind to show us a picture? Lots of different brembo calipers out there...
The Benz Master is offline  
November 20th, 2017, 02:50 AM   #3
Member
 
Joined: Jan 2008
From: bergland

Posts: 58
Thanks: 0

I Ride:
But mine is a sumo too with a 16,5 in the front.
And the caliper is exactly as in the pic:

https://i1.wp.com/www.asphaltandrubb...permoto-02.jpg
HusaPower is offline  
November 20th, 2017, 10:42 AM   #4
Member
 
RogerB39's Avatar
 
Joined: Oct 2011
From: Pacific Northwest

Posts: 65
Thanks: 10

I Ride: '10FX450-sold,'08KTM 690SMR(SOLD),'12KTM250SXF(SOLD) '16 Husky FC250 SMracebike,'14Triumph Thruxton
If the issue is trying to put the wheel on, or take it off, you have to remove the caliper and one of the brake pads to fit it to a 16.5 wheel.
Take the caliper loose (hanging on the brake line)
Install the front wheel
remove the inner brake pad
slide the caliper back over the rotor, install the pad and mount the caliper.
RogerB39 is offline  
November 20th, 2017, 11:58 AM   #5
Junior Member
 
Joined: May 2015
From: Belgium

Posts: 25
Thanks: 25

I Ride:
the husqvarna 450 fs have wide fork tees and a spacer between the wheel hub and the brake disc
Noubazor is offline  
November 20th, 2017, 04:28 PM   #6
Member
 
Joined: Jan 2008
From: bergland

Posts: 58
Thanks: 0

I Ride:
Yep.. thats why I need new clamps. But dont know which other models than FS (from 2015-) and SMR (2014) -which models uses this caliper- have the same width like these. Probably none after run these specific models's triple clamp part numbers here KTM.SparePartsFinderFrontend and here Husqvarna.SparePartsFinderFrontend. And there wasn't any match with other models.
But there were other clamp numbers which wasn't in the database or it couldn't be recognised I dont know why.. If there is a more whole searchable database please leave a comment.
Definitely it'd be a great help if someone who knows would tell which part is compatible with which model.
HusaPower is offline  
November 21st, 2017, 01:09 AM   #7
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,136
Thanks: 351

I Ride:
they widened the fork centres on the KTM SMs in about 2015. I think they are another 10mm apart.

Taffy
Taffy is online now  
November 21st, 2017, 02:33 AM   #8
Member
 
Joined: Jan 2008
From: bergland

Posts: 58
Thanks: 0

I Ride:
Yes they did in 2014. The distance of the tubes is 200mm.
HusaPower is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Suspension

Tags
clamps, fs570, triple, wider



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need wider rear wheel for 2011 FS570 maKe Wheels and Tires 1 July 23rd, 2011 06:01 AM
KTM triple clamps chamber66 Suspension 12 December 4th, 2007 11:42 AM
triple clamps Taffy Suspension 2 November 1st, 2007 03:43 PM
KTM Triple Clamps ktmlew Suspension 7 April 5th, 2007 04:43 PM
triple clamps yehasalamander Mechanical 3 September 12th, 2006 03:32 PM


Facebook Twitter Google+ RSS Feed