Go Back   Husaberg Forum > Mechanical and Technical > Suspension

Suspension Suspension and Handling Forum - bouncy bouncy!

Thanks Tree5Thanks
LinkBack Thread Tools Display Modes
October 24th, 2016, 12:38 AM   #11
NZ FE's Avatar
Joined: Aug 2016
From: New Zealand

Posts: 69
Thanks: 6

I Ride: 86 Honda XLR250R, 08 Husaberg FE 450 'road legal'
Originally Posted by Taffy View Post
I'll tell you wot ("WOT!!"), I will give you the dimensions of that bearing soon!

this is like having yer teeth pulled somedays. reminds me of the very first 'not the 9 o clock news' sketch, a very politically incorrect "Timothy's nine hour epic on making a cup of Tea"!

back soon


Thanks for the offer but its nolonger needed (unless you know of a different sources other than synergy) as at the same time as FE350 was posting i was cross referencing the number i had got from the parts fiches and from the subsequent google searches and checking on the synergy site to discover that same as what FE350 was telling that sadly its a no go on the offset bushing system from synergy at least. But thanks for the offer to give me the mesurements.
Cheers Hadrian

Last edited by NZ FE; October 24th, 2016 at 12:42 AM.
NZ FE is offline  
October 24th, 2016, 12:46 AM   #12
Senior Member
Joined: Nov 2001
From: Ely, England

Posts: 15,271
Thanks: 381

I Ride:
you could perhaps do a little at the top one if prepared to grind a little frame metal away.

there is no spare 'meat' at the bottom end. just below the rebound adjuster there is what? 2mm twixt shock and swing arm? so there's no chance.

I have been abswering twoi very similar threads here without recognising the titles. so if I said it was 'like this' it is because I have been talking of the 2009-2012. apologies!

Taffy is offline  

  Husaberg Forum > Mechanical and Technical > Suspension

bushes, lowering, older

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
lowering my fe 350 webfoot Suspension 9 September 17th, 2016 11:59 PM
lowering the front keyowne Mechanical 21 April 22nd, 2015 01:57 PM
Lowering Suspension - Yes/No??? c337b Suspension 20 February 13th, 2009 02:42 AM
slack in swingarm bushes Taffy Mechanical 4 May 8th, 2005 10:33 PM
Lowering the subframe tm-enduro Tech 5 November 10th, 2004 10:09 AM

Facebook Twitter Google+ RSS Feed