Go Back   Husaberg Forum > Mechanical and Technical > Suspension

Suspension Suspension and Handling Forum - bouncy bouncy!

LinkBack Thread Tools Display Modes
June 19th, 2010, 11:08 AM   #1
Junior Member
Joined: Jun 2010

Posts: 1
Thanks: 0

I Ride:

Hi all !

Sorry for my english, I am French...
I own a 501 FE HUSABERG 2000, with WP4358 MXMA front fork, 43mm.
Can you tell me how much oil should I put in each fork leg ???

Thanks a lot........
torps is offline  
August 16th, 2016, 10:58 PM   #2
Junior Member
Joined: Jul 2016
From: Leipzig

Posts: 13
Thanks: 2

I Ride: FE 600 2000
Something new about this topic or a manual for WP MXMA 4358 available?
Duc851 is offline  
August 17th, 2016, 12:18 AM   #3
Senior Member
Joined: Nov 2001
From: Ely, England

Posts: 15,307
Thanks: 383

I Ride: Husaberg FE501e 2003
I would have thought these fork manuals can be found on the internet easily enough? the oil should be set as an "air gap" and that would be 120mm or start at 115mm and look for full travel. if you don't get full travel then remove about 10cc from each leg.


Taffy is offline  

  Husaberg Forum > Mechanical and Technical > Suspension

fork, mxma, wp4358

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
fe 570 2010 fork springs - 2011 fork springs husadan Husaberg 2 June 13th, 2011 10:10 PM
Supermoto MXMA fork air chamber ? sotosberg Suspension 2 February 16th, 2011 04:39 AM
Fork Oil Stoveguy Suspension 10 February 24th, 2009 06:46 PM
Fork o/h jzfe Suspension 3 October 9th, 2007 12:11 PM
What Fork oil and Wt ? mark550fc Suspension 9 April 7th, 2006 09:00 AM

Facebook Twitter Google+ RSS Feed